Operation Manual

38
ENGLISH
4 Press and hold the number button (in
this example, 1) you want to store the
selected service into for more than 2
seconds.
5 Repeat the above procedure to store
other DAB services into other preset
numbers.
Notes:
• A previously preset DAB service is erased when a new
DAB service is stored in the same preset number.
• Preset DAB services are erased when the power supply
to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the
DAB services again.
DAB1 DAB2 DAB3
Band number and
“MEMO” appear
alternately for a while.
BAND
Tuning into a preset DAB
service
You can easily tune into a preset DAB service.
Remember that you must store services first. If you
have not stored them yet, see page 37.
1 Select the DAB tuner (DAB1–3).
1 Press SOURCE to select
DAB tuner as the source.
2 If necessary, press and
hold MODE BAND
repeatedly to select the
DAB band number
(DAB1, DAB2 or DAB3).
Each time you press and hold the button, the
DAB band changes as follows:
2 Select the number (1 – 6) for the
preset DAB service you want.
1
7
SCM
EN35-43.KD-LX330R[E]f 2/5/01, 10:08 AM38