Operation Manual

18
ENGLISH
Playing a CD Text
In a CD Text, some information about the disc (its
disc title, performer and track title) is recorded.
You can show these disc information on the
display.
Select text display mode while playing a
CD Text.
Each time you press the button, the display
changes as follows:
Notes:
• The display shows up to 12 characters at one time
and scrolls if there are more than 12 characters.
See also “To select the scroll mode — SCROLL
MODE” on page 25.
• When you press DISP while playing a conventional
CD, “NO NAME” appears for the disc title/
performer and the track title.
To play back only intros (Intro Scan)
You can play back the first 15 seconds of each
track sequentially.
1 Press MODE BAND while playing a CD.
“MODE” appears on the lower part of the
display, and the number buttons can work as
different function buttons.
2 Press INT (intro), while “MODE” is still on the
display.
Each time you press the button, CD intro scan
mode turns on and off alternately.
When the intro scan mode is turned on, “INTRO”
appears on the display for 5 seconds and the
track number flashes.
Prohibiting CD ejection
You can prohibit CD ejection and can lock a CD
in the loading slot.
While pressing SOURCE, press and hold OFF/0
for more than 2 seconds. “NO EJECT” flashes on
the display for about 5 seconds, and the CD is
locked and cannot be ejected.
Note:
If you press OFF/0 while CD ejection is prohibited, the
control panel moves down, but the CD cannot be ejected.
(“NO EJECT” appears on the display.)
To move up the display panel, press ¢ or
4 .
To cancel the prohibition and unlock the CD,
press and hold OFF/0 for more than 2 seconds
again, while pressing SOURCE.
“EJECT OK” flashes on the display for about 5
seconds, and the CD is unlocked.
Track number of the currently playing track
Disc Title / Performer
Track Title
Current track no. and
Elapsed playing time
EN16-18.KD-LX330R[E]f 2/5/01, 10:12 AM18