Operation Manual

12
ENGLISH
The same programme can be received on
different frequencies.
To deactivate the TA standby mode, press
TP/RDS again.
PTY Standby Reception
When you press PTY while
listening to an FM station, the
PTY indicator is lit during
reception of a PTY station and
the PTY standby mode is
engaged. The selected PTY
name stored on page 13 flashes
for 5 seconds.
• When the station being received is not a PTY
station, the PTY indicator flashes. Press ¢
or 4 to engage the PTY standby mode.
“SEARCH” appears on the display, and PTY
station search starts. When a PTY station is tuned
in, the PTY indicator is lit.
7 If you are listening to a CD or other connected
components and wish to listen to a selected
PTY broadcast, press PTY to enter the PTY
standby mode. (The PTY indicator lights up.)
If the selected PTY programme starts
broadcasting while the PTY standby mode is
active, the selected PTY name appears and the
playback source changes to the FM band. The
selected PTY programme can then be heard.
To deactivate the PTY standby mode, press PTY
again.
Using Standby Reception
Standby Reception allows the unit to switch
temporarily to your favourite programme (PTY:
Programme Type) and Traffic Announcement (TA)
from the current source (another FM station, CD
and other connected components).
• Standby Reception will not work if you are listening
to an AM station.
TA Standby Reception
When you press TP/RDS while
listening to an FM station, the TP
indicator is lit during reception of a
TP (Traffic Programme) station and
the TA standby mode is engaged.
• When the station being received is not a TP station,
the TP indicator flashes. Press ¢ or 4
to engage the TA standby mode. “SEARCH” appears
on the display, and TP station search starts. When a
TP station is tuned in, the TP indicator is lit.
7 If you are listening to a CD or other connected
components and wish to listen to a TP station,
press TP/RDS to enter the TA standby mode. (The
TP indicator lights up.)
If a traffic programme starts broadcasting while the
TA standby mode is active, “TRAFFIC” appears and
the playback source changes to the FM band. The
volume increases to the preset TA volume level (see
page 15) and the traffic programme can be heard.
Programme 1
broadcasting
on frequency C
Programme 1
broadcasting
on frequency D
Programme 1
broadcasting
on frequency B
Programme 1
broadcasting
on frequency E
Programme 1
broadcasting
on frequency A
TP/RDS
PTY
EN11-15.KD-LX330R[E]f 2/5/01, 10:13 AM12