Instruction Manual

ENGLISH

How to detach/attach the control panel

Detaching... Attaching...

Before operating the unit — Cancel the display demonstration and set the clock

• See also page 28.

~ Turn on the power.

Ÿ Enter the PSM settings.

! ] ⁄ Cancel the display demonstrations

Select “DEMO,” then “DEMO OFF.”

Set the clock

Select “CLOCK H” (hour), then adjust the hour.

Select “CLOCK M” (minute), then adjust the minute.

@ Finish the procedure.

When the power is turned off: Check the current clock time

When the power is turned on: Change the display information

CAUTION:

The lever comes out if you pressed the 0 button while the

panel is detached. If this happens, push the lever back into lock

position before attaching the panel.

Lever

EN02-05_KD-ADV6270[J]2.indd 5EN02-05_KD-ADV6270[J]2.indd 5 12/22/05 9:28:02 AM12/22/05 9:28:02 AM