Instruction Manual (Europe)

ENGLISH
25
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Bluetooth®
To On the faceplate
Random play
Press 3  repeatedly.
[GROUPRANDOM], [ALLRANDOM],
[RANDOMOFF]
Select a file from a folder/list Refer to “Select a file to play” on
page14.
Switch between connected
Bluetooth audio devices
Press 5.
(Pressing the “Play” key on the connected
device itself also causes switching of
sound output from the device.)
Listen to iPod/iPhone via Bluetooth (for KD-T922BT)
You can listen to the songs on the iPod/iPhone via Bluetooth on this unit.
Press B SRC repeatedly to select iPodBT.
• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB
input terminal. (Page13)
• If you plug in an iPod/iPhone to the USB input terminal while listening to
iPodBT source, the source automatically changes to iPodUSB source.
Press B SRC to select iPodBT source if the device is still connected via
Bluetooth.
Audio Settings
1 Press and hold .
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
.
Default: [XX]
[EQSETTING]
[PRESET EQ]
Selects a preset equalizer suitable to the music genre.
• Select [USER] to use the settings made in [EASYEQ] or [PROEQ].
[FLAT]/[DRVN 3]/[DRVN 2]/[DRVN 1]/[HARD ROCK]/[HIP HOP]/[JAZZ]/
[POP]/[R&B]/[USER]/[CLASSICAL]
Drive equalizer ([DRVN 3]/[DRVN 2]/[DRVN 1]) boosts specific frequencies
in the audio signal to reduce the noise heard from outside the car or running
noise of the tyres.
• When the display demonstration is activated ([ON] is selected initially,
page 8), [HARDROCK] is automatically selected as the [PRESET EQ].
– If you set [DEMO MODE] to [OFF] (page 8), [FLAT] is selected as the
default setting for [PRESET EQ].
JS_JVC_KD_T922BT_E_EN_4A.indd 25JS_JVC_KD_T922BT_E_EN_4A.indd 25 20/4/2020 10:50:05 AM20/4/2020 10:50:05 AM