ENGLISH FRANÇAIS ESPAÑOL DVD/CD RECEIVER RECEPTOR CON DVD/CD RECEPTEUR DVD/CD KD-AVX1 KD-AVX1 OK DISP D SOURCE MENU T/P BACK BAND For installation and connections, refer to the separate manual. Para la instalación y las conexiones, refiérase al manual separado. Pour l’installation et les raccordements, se référer au manuel séparé. INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D’INSTRUCTIONS LVT1323-003B [EU] Cover_KD-AVX1[EU]_003B_f.
ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.
• DO NOT install any receiver in locations where; – it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident. – it may obstruct the operation of safety devices such as air bags, as this may result in a fatal accident. – it may obstruct visibility. • DO NOT operate any receiver while manipulating the steering wheel, as this may result in a traffic accident. • The driver must not watch the monitor while driving.
ENGLISH How to read this manual The following methods are used to make the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see pages 61 – 65). • Button operations are mainly explained with the illustrations as follows: Characters shown on the monitor In addition to the Roman alphabets (A – Z, a –z), the following characters will be used to show the various information on the monitor.
How to reset your unit ........................... How to forcibly eject a disc ................... How to read this manual ........................ Characters shown on the monitor .......... 2 2 4 4 Monitor adjustments ...................... 34 Other disc operations ..................... 35 Introduction — Playable discs ............ 6 Basic operations ..................................... 35 Selecting the playback modes................ 37 List screen operations ............................
ENGLISH Introduction — Playable discs Discs you can play Caution for DualDisc playback You can play back the following discs (12 cm and 8 cm) on this receiver: • DVD Video: Recorded in PAL color system with Region Code “2” (see below). – DVD-R/DVD-RW recorded in the DVDVideo format can also be played. • Video CD (VCD)/audio CD • MP3/WMA/JPEG: Recorded either in CDR/CD-RW or DVD-R/DVD-RW/DVD-ROM. – CD-R/CD-RW: Compliant with ISO 9660 Level 1, ISO 9660 Level 2, Romeo, and Joliet.
ENGLISH Control panel Parts identification Monitor indications Ex.
ENGLISH Remote controller — RM-RK230 Installing the lithium coin battery (CR2025) Main elements and features MONITOR CONTROL MODE ASPECT MENU DVD / RECEIVER CONTROL ZOOM ATT +10 SOURCE –100 PRESET / TITLE BAND Before using the remote controller: • Aim the remote controller directly at the remote sensor on the receiver. Make sure there is no obstacle in between.
For advanced disc operations: • /TITLE 5 / ∞ – Select the titles (for DVD) or folders (for MP3/WMA). • 4 / ¢ (reverse skip/forward skip) • 1 / ¡ (reverse search/forward search)*6 For FM/AM tuner operations: • PRESET 5 / ∞ – Changes the preset stations. • 4/¢ – Functions to search for stations. Press briefly: auto search Press and hold: manual search For DAB tuner operations: • PRESET 5 / ∞ – Changes the preset services. • 4/¢ – Changes the services if pressed briefly.
ENGLISH Getting started Basic operations SOURCE MENU BACK BAND ~ Turn on the power. Ÿ ⁄ Adjust the volume. SOURCE SOURCE MENU MENU Volume level indicator You cannot select some sources if they are not ready. ! @ Adjust the sound as you want. (See pages 41 – 43.) For FM/AM tuner only BACK BAND For DAB tuner only To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power BACK BAND 10 AVX1EN_book.indb 10 05.2.
4 Finish the procedure. ENGLISH Setting the clock OK 1 SOURCE MENU 2 Select “PSM” menu. OK How to go back to the previous menu In the menu operations, you can go back to the previous screens by pressing BACK repeatedly. Ex.: 3 Set the hour and minute. 1 Select “Clock Hr” (hour), then adjust the hour. 2 Select “Clock Min” (minute), then adjust the minute. 3 Select “24H/12H”, then select “24Hours” or “12Hours”.
ENGLISH Radio operations Listening to the radio SOURCE MENU BACK BAND To tune in to a station manually ~ SOURCE MENU In step ! on the left column... 1 TUNER (FM1/2/3,AM) Ÿ BACK BAND Lights up when receiving an FM stereo broadcast with sufficient signal strength. 2 Select the desired station frequencies. Selected band appears. ! Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. 12 AVX1EN_book.indb 12 05.2.
1 SOURCE To tune in strong-signal FM station only In step 2 on the left column.... 1 Select “Lo/DX”, then set it to “Local”. MENU ENGLISH When an FM stereo broadcast is hard to receive 2 Select “MODE” menu. OK 3 Select “MONO”, then set it to “On”. 2 Finish the procedure. OK Lights up when “Local” mode is activated. Only stations with sufficient signal strength will be detected. 4 Finish the procedure. OK To tune in to all receivable stations, repeat the same procedure to set “Lo/DX” to “DX”.
ENGLISH Storing stations in memory You can preset six stations for each band. FM station automatic presetting— SSM (Strong-station Sequential Memory) 1 SOURCE MENU TUNER (FM1/2/3,AM) 2 Select the FM band (FM1 – FM3) you want to store into. BACK BAND “-SSM-” is shown until automatic presetting is over. Local FM stations with the strongest signals are searched and stored automatically in the FM band. Manual presetting Ex.: Storing FM station of 92.5 MHz into the preset number 1 of the FM1 band.
Listening to a preset station While selecting TUNER as the source.... ENGLISH 4 1 The preset list appears. 2 Select the preset station (1 – 6) you want. PRESET LIST appears. 5 OK OK • You can also move to the preset list by selecting “List” on the “MODE” menu. See “When an FM stereo broadcast is hard to receive” on page 13 to see how to move into the “MODE” menu. When using the remote controller.... “Preset1” flashes for a while.
ENGLISH FM RDS operations Searching for your favorite FM RDS programme T/P BACK BAND You can tune in to a station broadcasting your favorite programme by searching for a PTY code. • To store your favorite programme, see page 17. ~ ! Select one of the twenty-nine PTY codes. T/P OK If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in. PTY menu appears. Ÿ Select “PTY Search”.
RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. By receiving the RDS data, this receiver can do the following: • Programme Type (PTY) Search (see page 16) • Temporarily switches to Traffic Announcement—TA Standby Reception. (See the right column.) • Temporarily switches to your favorite programme—PTY Standby Reception. (See pages 18 and 45.) • Tracing the same programme automatically —Network-Tracking Reception (See page 18.
ENGLISH • If lights up, TA Standby Reception is activated. • If flashes, TA Standby Reception is not yet activated. (This occurs when you are listening to an FM station without the RDS signals required for TA Standby Reception.) To activate TA Standby Reception, tune in to another station (or DAB service) providing these signals. will stop flashing and remain lit. To deactivate the PTY Standby Reception, select “OFF” on “PTY” in the “MODE” menu. goes off.
ENGLISH Disc operations Playing a disc in the receiver The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program). If the current disc is an audio CD, CD Text, MP3/WMA, JPEG, or VCD without PBC, all tracks will be played repeatedly until you change the source or eject the disc. • If a title list or disc menu appears while playing a DVD or VCD with PBC, see “Disc menu operations” on page 24.
ENGLISH • When inserting a DVD disc: DVD playback starts automatically on the monitor when the parking brake is applied. The screen such as below appears when pressing D DISP. • When inserting a VCD: VCD playback starts automatically on the monitor when the parking brake is applied. The screen such as below appears when pressing D DISP.
ENGLISH Basic operations Operations Monitor indication and/or next operation To stop play temporarily Playback is paused. A still picture appears. A Frame by frame playback B Slow motion playback • No sound comes out during Slow Motion Playback. • When playing a VCD, Reverse Slow Motion Playback is prohibited. To resume normal play: To replay the previous scenes—One Touch Replay OK To stop playback BACK BAND The playback position moves back about 10 seconds before the current position.
ENGLISH To go to the next or previous chapters/tracks • For DVD: During play or pause To the following chapters/tracks. To go back to the beginning of the current chapter/track, then the previous chapters/tracks. To fast-forward or reverse the chapter/track To locate a particular title/chapter/ track directly • For DVD: During play or pause—select a chapter. During stop—select a title. • For MP3/WMA/JPEG: Select a track within the same folder.
Selecting audio languages For DVD: You can select the language to listen to if the disc has multiple audio languages. 1/3 ENGLISH Selecting subtitles You can select the language of the subtitle to be shown on the monitor. • You can set the initial subtitle language using the setup menu (see page 30). ENGLISH DVD/VCD special functions 1/3 1/3 1/3 ENGLISH ENGLISH ENGLISH Ex.: When the disc has 3 options Ex.: When the disc has 3 options For VCD: You can select the audio channel to play.
ENGLISH Disc menu operations Menu-driven playback is possible while playing back a DVD with menu-driven features or a VCD with the PBC (PlayBack Control). While playing a DVD 1 Canceling the PBC playback 1 2 Select a track to start normal playback using the number buttons (see page 9). To resume the PBC function A title list or disc menu will appear on the monitor. Zoom in 2 Select the item you want on the menu. JPEG 1 Selected item starts playback.
About the On-Screen Bar You can check the disc information and use some functions through the on-screen bar. • For audio CD, CD Text, and MP3/WMA disc you can use the on-screen bar only when using an external monitor and Dual Zone is on (see page 40). • For audio CD, CD Text, and MP3/WMA disc you can also use the control screen and list screen (see pages 28 and 29).
ENGLISH Basic on-screen bar operations To erase the on-screen bar 1 Display the on-screen bar. or (twice) (DVD, VCD) (CD Text/audio CD, MP3/WMA, JPEG) • The on-screen bar for a CD or MP3/WMA/ JPEG disc automatically disappears in a few seconds after the last operation. • The selectable options for Repeat/Intro/ Randam plays: Repeat play (See page 37.) When a JPEG disc is loaded, skip to step 3. DVD: 2 Select an item. 3 Make a selection. REPEAT , REPEAT Repeat play (See page 37.
INTRO Intro play (See page 38.) VCD (while PBC is not in use): (Canceled) INTRO To search for a particular point by playing time 1 Select (or ). 2 Enter the elapsed playing time of the current title or of the disc. ENGLISH INTRO , MP3/WMA: INTRO TRACK INTRO FOLDER (Canceled) CD Text/audio CD: INTRO TRACK RANDOM , (Canceled) RANDOM Random play (See page 38.) VCD (while PBC is not in use): RANDOM (Canceled) Ex.: • To enter 1 (hours): 02 (minutes): 00 (seconds), press 1, 0, 2, 0, then 0.
ENGLISH Basic control screen operations You can search for and play the desired items through the control screen when using the external monitor. • The control screen automatically appears on the monitor when you insert a disc (external monitor only). • JPEG control screen appears only when playback stops. MP3/WMA/JPEG control screen Track Information Album Weather Artist Robert M. Smith Title Rain 1 2 3 4 5 6 7 8 9 p While Dual Zone (see page 40) is on....
While Dual Zone is on and the disc play stops.... You can display the folder list/track list before starting play when using the external monitor and Dual Zone function (see page 40). On this list, you can confirm the contents and start playing a disc. 1 Display the folder list. Each time you press the button, the list screen comes on and goes off. ENGLISH For MP3/WMA/JPEG: List screen operations 2 Select a folder on the list.
ENGLISH AV setup menu You can store the initial disc playback status. • While playing, no change can be made on the setup menu. 4 Select an item you want to set up. Basic setting procedure While stop.... 1 SOURCE MENU 2 Select “MODE” menu. OK Ex.: When selecting “DOWN MIX” 5 Select an option. OK MODE menu when a DVD is loaded To set other items, repeat steps 4 and 5. 6 Finish the procedure. DISP D 3 Select “Set Up”. OK 30 AVX1EN_book.indb 30 05.2.
4 From the remote controller: 5 Select an option. ENGLISH You can also set up from the remote controller when a DVD or a VCD is inserted. • While playing, no change can be made on the setup menu. • When shipped from the factory, the on-screen languge is set to English. To change the language, see page 32. AUDIO DIGITAL AUDIO OUTPUT STREAM/PCM DOWN MIX STEREO DOLBY SURROUND ONSTEREO D. RANGE COMPRESSION While stop....
ENGLISH Item Contents MENU LANGUAGE Select the initial disc menu language. AUDIO LANGUAGE Select the initial audio language. SUBTITLE Select the initial subtitle language or erase the subtitle (OFF). ON SCREEN LANGUAGE (OSD LANGUAGE) Select the language for the Setup menu called up from the remote controller (see page 31) and some indications shown on the monitor. • The language for the menus called up from the unit does not change.
Contents DIGITAL AUDIO OUTPUT (D. AUDIO OUTPUT) Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal on the rear. For details, see page 65. • PCM ONLY (PCM) : Select this when connecting an amplifier or a decoder incompatible with Dolby Digital, DTS or MPEG Audio, or connecting to a recording device. • DOLBY DIGITAL/PCM (DOLBY DIGITAL) : Select this when connecting an amplifier or a decoder compatible with Dolby Digital.
ENGLISH Monitor adjustments You can adjust color and brightness of the monitor on the unit. 5 Adjust the item. While selecting disc (DVD, VCD, or JPEG disc only) as the source.... 1 SOURCE MENU 2 Select “MODE” menu. OK Ex.: When adjusting “BRIGHT” • Each time you press 4/¢ , the menu screen disappears for a few seconds and you can see the result of the adjustment. To adjust other items, repeat steps 4 and 5. 3 Select “Screen Cont.” 6 Finish the procedure.
Other disc operations To fast-forward or reverse the chapter/track ENGLISH In this section, you can learn how to use the buttons on the control panel in order to operate the DVD/CD player. Basic operations Fast-forwards. To stop a disc BACK BAND To play a disc again OK Reverses. • The search speed changes to x2 ] x10 for all discs (DVD, VCD, CD), but the information shown on the monitor is only for DVD/VCD.
ENGLISH To go to the next or previous folders Prohibiting disc ejection JPEG You can lock a disc in the loading slot. 1 To next folders. To previous folders. • To select a particular track in a folder (for MP3/WMA disc) after selecting a folder: 2 Select “NO EJECT?”. To change monitor indication JPEG OK DISP D • Each time you press D DISP, the monitor changes between the source screen and DVD/ VCD/JPEG playback.
ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 SOURCE Playback mode indicator appears. MENU 2 Select “MODE” menu. OK 3 Select your desired playback mode. Repeat • For DVD: During play or pause. • For VCD: While PBC (see page 24) is not in use. Mode Plays repeatedly Chapter*1: The current chapter. • lights up. The current title. • lights up. The current track. • lights up. All tracks of the current folder. • lights up.
ENGLISH Mode Random Plays at random *4 Folder : Off: All tracks of the current folder, then tracks of the next folder and so on. • lights up. All tracks of the disc. • lights up. Cancels. Mode Plays the first 15 seconds of Track: All tracks of the disc. • lights up. First tracks of all folders. • lights up. Cancels. • For VCD: While PBC (see page 24) is not in use. Disc: OK Ex.: When “Disc” is selected Intro • For VCD: While PBC (see page 24) is not in use. OK Folder*4: Off: Ex.
OK You can display the folder list/file list and select a folder/file directly while playing back. ENGLISH 4 Select the list you want to use. List screen operations When “File” is selected, the file list of the current folder appears. Folder/file list screens JPEG Folder list 5 Select the folder/file you want. OK When selecting a folder from the list, the playback of the first track in the folder starts. • The track list appears when selecting the current folder on the folder list.
ENGLISH Dual Zone operations Playing back two sources at a time You can connect external audio equipment to the 2nd AUDIO OUT plug on the rear, and play back a disc separately from the source selected on the unit. You can activate Dual Zone while listening to any source. • When Dual Zone is in use, you can only operate the DVD/CD player using the remote controller. On the control panel: You can also activate and deactivate Dual Zone. 1 SOURCE MENU 2 Select “D-ZONE”.
Selecting preset sound modes You can select a preset sound mode suitable to the music genre. 3 Select one of the preset sound modes. ENGLISH Sound adjustments Available sound modes: Hard Rock/R&B/Pop/Jazz/Dance/Country/ Reggae/Classic User1/User2/User3 Flat (To cancel the sound mode) 1 4 Finish the procedure. SOURCE MENU DISP D 2 Select “EQ” menu. OK Ex.: When “Hard Rock” is selected Storing your own sound adjustments You can adjust the sound modes and store your own adjustments in memory.
ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 SOURCE MENU 2 Select “SEL” menu. OK 3 Select your desired adjustment item. Fad/Bal (Fader/Balance) OK Adjust fader—speaker output balance between the front and rear speakers. • Upmost—front only • Downmost—rear only When using a two-speaker system, set the fader center. Adjust balance—speaker output balance between the left and right speakers. • Leftmost—left only • Rightmost—right only 42 AVX1EN_book.
Adjust and store the volume level of each source except FM. Once you have made an adjustment, it is memorized, and the volume level will automatically increase or decrease by adjusted level when you change the source. Adjust to match the input level to the FM sound level. • –12 (min) to +12 (max.) HPF (High pass filter) Adjust the cut-off frequency to the front/rear speakers according to the subwoofer setting. • 55 Hz: Cuts off frequencies lower than 55 Hz. • 85 Hz: Cuts off frequencies lower than 85 Hz.
ENGLISH General settings — PSM 3 Select a PSM item. Basic procedure You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 SOURCE MENU Ex.: When you select “Dimmer” 4 Adjust the PSM item selected. 2 Select “PSM” menu. OK 5 Repeat steps 3 and 4 to adjust the other PSM items if necessary. 6 Finish the procedure.
Selectable settings, [reference page] Dimmer Auto: [Initial]; Dims the monitor when you turn on the headlights. Off: Cancels. On: Activates dimmer. Time Set: Sets the Dimmer On/Off time. Bright Brightness You can adjust the brightness to make the monitor clear and legible. –15 (darkest) to +15 (brightest) [Initial]; 0 • You can also adjust the brightness on “Screen Cont.” on the “MODE” menu when the source is DVD, VCD, or JPEG disc, [34].
ENGLISH Indications Selectable settings, [reference page] IF Filter Intermediate frequency filter In some areas, adjacent stations may interfere with each other. If this interference occurs, noise may be heard. Auto: [Initial]; When this type of interference occurs, this unit automatically increases the tuner selectivity so that interference noise will be reduced. (But the stereo effect will also be degraded.
Selectable settings, [reference page] Amp Gain Amplifier gain control You can change the maximum volume level of this receiver. High Power: [Initial]; VOL 00 – VOL 50 Low Power: VOL 00 – VOL 30 (Select this if the maximum power of the speaker is less than 50 W to prevent them from damaging the speaker.) Off: Deactivates the built-in amplifier. AV INPUT Audio-Video input You can determine the use of LINE IN and VIDEO IN jacks on this receiver.
ENGLISH Other main functions Assigning titles to the sources 4 Assign a title. 1 Select a character set. DISP You can assign titles to CDs (both in this receiver and in the CD changer), and change the source names of AV-INPUT and EXT-INPUT. D 2 Select a character. Maximum number of characters Sources AV-INPUT/EXTINPUT Up to 16 characters DISC/CD-CH Up to 32 characters (up to 30 discs) • For available characters, see page 4.
Attaching the control panel ENGLISH Detaching the control panel When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. Changing the control panel angle The control panel comes out toward you. The control panel changes its angle as follows.
ENGLISH CD changer operations Playing discs in the CD changer SOURCE MENU About the CD changer It is recommended to use the JVC MP3compatible CD changer with your receiver. • You can also connect other CH-X series CD changers (except CH-X99 and CH-X100). However, they are not compatible with MP3 discs, so you cannot play back MP3 discs. • You cannot use the KD-MK series CD changers with this receiver.
To fast-forward or reverse the track ENGLISH Ÿ Select a disc. 1 Fast-forwards. Reverses. DISC LIST appears. To go to the next or previous tracks 2 OK To the following tracks. To the beginning of the current track, then the previous tracks. To go to the next or previous folders (only for MP3 discs) To next folders. • You can move to the other lists by pressing 4 / ¢. • When the current disc is an MP3 disc, you can move to FOLDER LIST by selecting it on DISC LIST. To previous folders.
ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 SOURCE Selectable modes Repeat Mode Plays repeatedly Track: The current track. • lights up. All tracks of the current folder. • lights up. All tracks of the current disc. • lights up. Cancels. Folder*: MENU Disc: 2 Select “MODE” menu. OK Off: Random Mode Plays at random Folder*: All tracks of the current folder, then tracks of the next folder and so on. • lights up.
ENGLISH External component operations Playing an external component SOURCE MENU You can connect an external component to LINE IN plug and VIDEO IN plug on the rear, or to the CD changer jack on the rear using the KS-U57 Line Input Adapter (not supplied) or KS-U58 AUX Input Adapter (not supplied). Ÿ ! Turn on the connected component and start playing the source. Adjust the volume. • For connection, see Installation/Connection Manual (separate volume).
ENGLISH DAB tuner operations Listening to the DAB tuner SOURCE MENU BACK BAND ~ SOURCE Ÿ ! MENU Start searching for an ensemble. When an ensemble is received, searching stops. To stop searching, press the same button again. BACK BAND ⁄ Current band Select a service (either primary or secondary) to listen to. Programme type Service label Ensemble label To tune in to an ensemble manually In step ! .... Activate “Manual Search” Select ensemble frequencies 54 AVX1EN_book.indb 54 05.2.
DAB can deliver CD quality sound without any annoying interference and signal distortion. Furthermore, it can carry text, pictures, and data. When transmitting, DAB combines several programmes (called “services”) to form one “ensemble”. In addition, each “service”—called “primary service”—can also be divided into its components (called “secondary service”). A typical ensemble has six or more programmes (services) broadcast at the same time.
ENGLISH Storing DAB services in memory You can preset six DAB services (primary) for each band. Ex.: Storing an ensemble (primary service) into the preset number 4 of the DAB1 band. When the source is DAB.... 1 Tuning in to a preset DAB service When the source is DAB.... 1 BACK BAND 2 BACK BAND 2 Select an ensemble (primary service). 3 Select the preset number you want. 3 OK PRESET LIST appears. 4 Select a preset number. • You can move to the lists of the other DAB bands by pressing 4/¢.
2 Select “MODE” menu. TA (Road Traffic News) Standby Reception • Operations are exactly the same as explained on page 18 for FM RDS stations. • You cannot activate TA Standby Reception separately for the DAB tuner and for FM tuner. • The volume changes to the preset TA volume level (see page 45). ENGLISH Using the standby receptions OK 3 Select “Announce”. PTY Standby Reception • Operations are exactly the same as explained on page 18 for FM RDS stations.
ENGLISH Tracing the same programme— Alternative Frequency Reception To show the Dynamic Label Segment (DLS) information DISP D You can keep listening to the same programme by activating the Alternative Frequency Reception. • While receiving a DAB service: When driving in an area where a DAB service cannot be received, this receiver automatically tunes in to another ensemble or FM RDS station, broadcasting the same programme.
How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs.
ENGLISH Language codes Code Language Code Language Code Language AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DZ EL EO ET EU FA FI FJ FO FY GA GD GL GN GU HA HI HR HU HY IA IE Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Bhutani Greek Esperanto Estonian Basque Persian Finnish Fiji Faroese Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Croa
Basic operations Turning on the power • By pressing SOURCE on the receiver, you can also turn on the power. Selecting the sources • When no disc is loaded in the receiver and Dual Zone is off, “DISC” cannot be selected. • Without connecting to the CD changer or the DAB tuner, “CD-CH” or “DAB” cannot be selected. • If a DAB tuner is connected and Alternative Frequency Reception for DAB services (DAB AF) is activated, Network-Tracking Reception (AF-Regn’l) is also activated automatically.
ENGLISH • Some DVD-R/DVD-RW or CD-R/CD-RW may not play back on this receiver because of their disc characteristics, and for the following causes: – Discs are dirty or scratched. – Moisture condensation occurs on the lens inside the receiver. – The pickup lens inside the receiver is dirty. – CD-R/CD-RW on which the files are written with “Packet Write” method. – DVD-R/DVD-RW which are not written in UDF-Bridge Format (eg. UDF format or ISO format).
• It is recommended that you record a file at 640 x 480 resolution. (If a file has been recorded at a resolution of more than 640 x 480, it will take a long time to be shown.) • This System can play only baseline JPEG files. Progressive JPEG files or lossless JPEG files cannot be played. Baseline JPEG format: Used for digital cameras, web, etc. Progressive JPEG format: Used for web. Lossless JPEG format: An old type and rarely used now.
ENGLISH About sounds reproduced through the rear terminals • Through the analog terminals (Speaker out/LINE OUT/2nd AUDIO OUT): 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. (DOWN MIX: see page 33.) • Through DIGITAL OUT (optical): Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted through this terminal. (For more details, see page 65.
Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 33).
ENGLISH Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms • Sound cannot be heard from the speakers. FM/AM General • The receiver does not work at all. Causes Remedies The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. The built-in microcomputer may have functioned incorrectly due to noise, etc.
• Disc cannot be played back. Causes Disc is inserted upside down. Disc playback • CD-R/CD-RW or DVD-R/ CD-R/CD-RW or DVD-R/ DVD-RW cannot be played DVD-RW is not finalized. back. • Tracks on the CD-R/ CD-RW or DVD-R/ DVD-RW cannot be skipped. Remedies Insert the disc correctly. • Insert a finalized CD-R/ CD-RW or DVD-R/ DVD-RW. • Finalize the CD-R/CD-RW or DVD-R/DVD-RW with the component which you used for recording. • Disc cannot be recognized. The DVD/CD player may have functioned incorrectly.
ENGLISH Symptoms MP3/WMA playback • Disc cannot be played back. Causes Remedies No MP3/WMA tracks are recorded on the disc. Change the disc. MP3/WMA tracks do not have the extension code <.mp3> or <.wma> in their file names. Add the extension code <.mp3> or <.wma> to their file names. MP3/WMA tracks are not recorded in a compliant format. Change the disc. Record MP3/WMA tracks using a compliant application (see page 6). MP3/WMA tracks are recorded in DVD+R/ DVD+RW media. Change the disc.
JPEG playback • Disc cannot be played back. • No picture appears on the external monitor at all. • “No Disc” appears on the monitor. Causes Remedies No JPEG files are recorded on the disc. Change the disc. JPEG files do not have the extension code <.jpg> or in their file names. Add the extension code <.jpg> to their file names. JPEG files are not recorded in a compliant format. Change the disc. Record JPEG files using a compliant application (see page 6).
ENGLISH DAB tuner Symptoms Causes Remedies • “No DAB Signal” appears on the monitor. Signal is too weak. Search for another ensemble. • “Reset08” appears on the monitor. This receiver is not connected to the DAB tuner correctly. Connect this receiver and the DAB tuner correctly and reset the receiver (see page 2). • The DAB tuner does not work at all. The built-in microcomputer may function incorrectly due to noise, etc. Reset the receiver (see page 2).
Specifications Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 20 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 20 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range: Frequencies: 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit ¿Tiene PROBLEMAS con la operación? Por favor reinicialice su unidad Consulte la página de Cómo reposicionar su unidad Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à la page intitulée Comment réinitialiser votre appareil EN, SP, FR © 2005 Victor Company of Japan, Limited Rear_KD-AVX1[EU]_003A_f.
