Owner's Manual

ENGLISH
13
SiriusXM settings
1
Press and hold .
2 Turn the volume knob to select [ SIRIUSXM ], then press the knob.
3 Turn the volume knob to make a selection (see the following table), then
press the knob.
4 Repeat step 3 until the desired item is selected/activated or follow the
instructions stated on the selected item.
5 Press to exit.
To return to the previous setting item, press
.
Default:
XX
CH LOCK To unlock settings:
1 Turn the volume knob to select a number.
2 Press to move to the entry position.
3 Repeat steps 1 and 2 to enter the current pass code.
(Initial pass code is 0000.)
4 Press the volume knob to confirm.
CODESET 1 Press the volume knob to enter [ NEW CODE ].
2 Turn the volume knob to select a number.
3 Press to move to the entry position.
4 Repeat steps 2 and 3 to enter a new 4-digit pass code.
5 Press the volume knob to confirm.
6 Repeat steps 2 to 5 to reconfirm the pass code.
• Make a note of the new pass code to enter channel lock settings from next time.
LOCK SET MATURE CH :Selects the SiriusXM-defined lock setting.; USER DEFINED :Selects the
user-defined lock setting.;
OFF :Cancels.
CHEDIT
*
1
1 Turn the volume knob to select a category, then press the knob.
2 Turn the volume knob to select a channel you want to lock, then press the knob.
“L” appears in front of the channel number.
3 Press and hold to exit.
CHCLEAR
*
1
YES :Clears all the locked channels.; NO :Cancels.
TUNE START
*
2
ON :Selected SmartFavorite channel starts playback from
the beginning of the song.;
OFF :Cancels.
SIGNAL LVL NO SIGNAL / WEAK / GOOD / STRONG :Shows the strength
of the current received signal.
BUF USAGE 0% — 100% ( 0 ):Shows the memory usage for Replay
buffer.
SXM RESET YES :Resets stored channel and lock setting to default.;
NO :Cancels.
*
1
Displayed only when [ USER DEFINED ] is selected.
*
2
Available only if the connected SiriusXM Vehical Tuner is SXV200 or later that
supports SmartFavorites.
SiriusXM® Radio
JS_JVC_KD_R960BTS_J_EN_01.indd 13 7/7/2014 2:17:04 PM