INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Using Scene Select
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Others
9
Aspect Marker
For specifying how boundary markers are to be
used to indicate the parts of an image that are
beyond the range of the aspect ratio selected in
[Aspect Ratio].
0
Line+Halftone:
Displays the boundary using lines, and areas
outside the boundary in halftone.
0
Halftone:
Displays
areas
outside the boundary in halftone.
0
Line:
Displays the boundary using lines.
0
Off:
Hides the boundary markers.
[Setting Values: Line+Halftone, Halftone, Line,
ROff]
Memo :
0
When [Aspect Ratio] is set to
“16:9” or
“16:9(+4:3)”, this item is fixed at “Off” and cannot
be selected.
9
Safety Zone
For setting the percentage of area that is to be
deemed as valid area (Safety Zone) within the
boundary of the aspect ratio selected in [Aspect
Ratio].
[Setting Values: 95%, 93%, 90%, 88%, 80%, ROff]
9
Center Mark
For
specifying whether to display a mark to indicate
the screen center within the aspect ratio selected
in [Aspect Ratio].
[Setting Values: ROn, Off]
Display Settings Item
This menu is used to set the displays on the LCD
monitor and viewfinder screen.
Zoom
For setting the display method of the zoom
position.
0
Number:
Displays the zoom position in numbers (0-99).
0
Bar:
Displays the zoom position in a bar.
0
Off:
Does not display the zoom position.
[Setting Values: Number, RBar, Off]
Focus
For setting the display method of the approximate
distance to the subject in focus during manual
focus.
0
Feet:
Displays the focus in feet.
0
Meter:
Displays the focus in meters.
0
Off:
Does not display the focal length during focus.
[Setting Values: Feet, RMeter, Off]
Record Format
For setting whether to display the video format
during recording or playback.
[Setting Values: ROn, Off]
Media Remain
For setting
whether to display the remaining space
of the recording SD card.
[Setting Values: ROn, Off]
Memo :
0
When the remaining space warning is
displayed, the information appears even when
“Off
”
is selected.
0
The displayed time is an estimate.
TC/UB
For specifying whether to display the time code
(TC) or
user’s bit (UB) rate in the display on the LCD
monitor and viewfinder screen.
[Setting Values: UB, RTC, Off]
98
LCD/VF Menu
Menu Display and Detailed Settings