INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Using Scene Select
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Others
LCD/VF Menu
Item for specifying settings related to the LCD
monitor or viewfinder screen.
This menu screen can be used to specify settings
related to the Focus Assist mode, zebra pattern
display, screen size, marker, and safety zone. In
addition, it is also used for selecting whether to
display characters on the LCD monitor or
viewfinder screen, as well as for adjusting the
picture quality of the LCD monitor.
Shooting Assist...
Menu for setting the Shooting Assist function.
(A P97 [Shooting Assist Item] )
Marker Settings...
For setting items such as the safety zone and
center mark.
(A P97 [Marker Settings Item] )
Display Settings...
For specifying display-related settings.
(A P98 [Display Settings Item] )
LCD + VF
For selecting a method to switch between the LCD
monitor and viewfinder screen displays.
(A P32 [Adjusting the LCD Monitor and
Viewfinder] )
0
On:
Displays images on the viewfinder at all times.
0
Off:
Turns off
the viewfinder screen display when the
LCD monitor is turned on.
[Setting Values: On, ROff]
VF Bright
For setting
the brightness of the viewfinder screen.
Increasing the value increases the brightness.
[Setting Values: -10 to +10 (R 0)]
VF Contrast
For setting
the difference in luminance between the
darkest and brightness areas in the viewfinder
screen.
Increasing the value increases the contrast.
[Setting Values: -10 to +10 (R 0)]
LCD Contrast
For setting
the difference in luminance between the
darkest and brightness areas in the LCD monitor.
Increasing the value increases the contrast.
[Setting Values: -10 to +10 (R 0)]
LCD Backlight
For setting the brightness of the LCD monitor
backlight.
Increasing the value increases the brightness.
[Setting Values: -1, 0, R +1]
LCD Mirror
For specifying the image display method when
facing the LCD monitor.
Select “Mirror” to display the image after laterally
inverting it. (Mirror display)
(A P32 [Adjusting the LCD Monitor and
Viewfinder] )
[Setting Values: Mirror,
RNormal]
Memo :
0
The setting of this item is valid only in Camera
mode.
0
During color bar, menu screen and status
screen display, the “Mirror
” setting is disabled.
(A P119 [Color Bar Output] )
96
LCD/VF Menu
Menu Display and Detailed Settings