INSTRUCTIONS

Splitting the Clips Freely
(Clip Cutter Trig)
You can
split the clips freely without having to stop
recording during shooting.
1
Assign the “Clip Cutter Trig” function to
any of the user buttons.
(A P
34 [Assignment of Functions to User
Buttons] )
2
Press
the user button that is assigned with
“Clip Cutter Trig”
during shooting.
A clip cut icon (Q) appears on the display
screen for 3 seconds, and the clip is split.
.
P 13000K 1/ 100
F1. 6
0
dB
AE
+
6
40 30 20 10
0
12 :34 :56
Jan 1 2,2016
00:00: 00.00
5 . 6 f t
Memo :
0
Clips cannot be split again for a few seconds
after the operation is performed.
0
This item cannot be used when
[
Slot Mode] is
set to “Backup”.
0
Available only when
[
System] is set to “HD” or
“SD”.
(A P69
[Backup Rec] )
0
This item cannot be used when [Rec Mode] is
set to a value other than
“Normal” or “Pre Rec”.
(A P
106 [ Rec Mode ] )
0
The split clips are recorded seamlessly without
interruptions in the video.
Series Rec
0
Series Rec mode is specified in the factory
default.
([Main
Menu
] B [System] B [Record Set] B [Slot
Mode] is set to “Series”.)
(A P106
[ Slot Mode ] )
0
If both the slots are loaded with recordable
cards, pressing the [REC] button starts
recording
only to the media in the selected slot.
When the remaining space in the selected
media runs out, recording continues by
automatically activating the media in the other
slot.
0
There is no indication on the display screen
when the Series Rec mode is set.
Splitting the Clips Freely (Clip Cutter Trig)
67
Shooting