INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Using Scene Select
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Others
Rec Mode
For selecting the record mode for recording to the
SD card.
(A P71 [Special Recording] )
[Setting Values:
RNormal, Pre Rec, Clip
Continuous, Frame Rec, Interval Rec]
Memo :
0
When [Slot Mode
] is set to “Backup”, this item is
fixed at “Normal”.
9
Pre Rec Time
For setting the pre-recording time when [Rec
Mode] is set to
“Pre Rec”.
[Setting Values: R5sec, 10sec, 15sec]
Memo :
0
When the frame rate setting in [Main Menu]
B
[System] B [Record Set] B [Record Format] B
[Frame & Bit Rate] is set to “XHQ”, “15sec”
cannot be selected.
9
Rec Frames
For setting the number of frames to record when
[Rec Mode] is set to “Frame Rec” or “Interval Rec”.
[Setting Values: R1frame, 3frames, 6frames]
9
Rec Interval
For setting the recording time interval when [Rec
Mode] is set to “Interval Rec”.
[Setting
Values: R1sec, 2sec, 5sec, 10sec, 30sec,
1min, 2min, 5min, 10min, 30min, 1hour]
Slot Mode
For setting the operation of the card slot.
0
Series:
Mode that activates the two slots sequentially.
0
Dual:
Mode that activates the two slots at the same
time.
(A P68 [Dual Rec] )
0
Backup:
Mode that enables recording to slot B without
using the [REC] button. This item is selectable
only when [
Rec Mode] is set to “Normal”.
Start or stop the recording using the [Backup
Rec] menu or press the [USER1] to [USER7],
[LCD KEY▲], [LCD KEY▶], [LCD KEY▼], [LCD
KEY◀] button that is assigned with “Backup
Trig”.
(A P
69 [Backup Rec] )
Memo :
0
When this is set to “Series”, and recordable
media are inserted in both slots, pressing the
[REC]
button starts recording only to the card in
the selected slot (active slot).
0
When “Series” is selected, and
[Record
Format
] B [Format] is set to “AVCHD”, the clips
are recorded over the slots seamlessly without
interruption in the video.
0
When
this
is set to “Dual”, and recordable media
are inserted in both slots, pressing the [REC]
button starts simultaneous recording to the
cards in both slots.
9
Backup Rec
For
starting/stopping
backup recording with [REC]/
[STBY].
This item is selectable only when [Slot Mode] is set
to “Backup”.
Memo :
0
When recording
is stopped due to no remaining
space on the media, etc., this item is fixed at
“STOP” and cannot be selected.
106
System Menu
Menu Display and Detailed Settings










