Manual

Toturnonor off RecordingTimer after itssetting
isdone
1 Press CLOCK/TIMER repeatedly until _. ?_oc_
"REC" appears on the display.
(Timer) indicator lights up and the REC
(Recording Timer) indicator starts flashing on
the display.
2 To turn off the Recording Timer, press ..........
CANCEL/DEMO.
The REC (Recording Timer) indicator goes
off from the display ("REC OFF" appears on
the display for 2 seconds).
The Recording Timer is canceled, but the setting for the
Recording Timer remains in memory.
Or
To turn on the Recording Timer, press
SET/DISPLAY.
"OK V'" appears on the display for 2 seconds.
The settings you have done are shown on the
display in sequence fbr your confirmation.
SEW
DISPLAY
%
UsingSleepTimer
With Sleep Timer, you can f_.]] asleep to music. You can set
Sleep Timer only while the unit is turned on.
Timer Priority
?
it
Since each timer can be set separately, you may wonder what
happens if the setting fbr these timers overlaps.
Below are some examples.
Recording Timer has priority over Daily Timer and Sleep Timer.
• If Daily Timer is set to come on while Recording Timer is
operating, Daily Timer will not come on at all.
AM 6:00 6:30 7:00 7:30
I I I I
Recording Timer [ I
I I I I
Daily Timer
i
• If Recording Timer is set to come on while Sleep Timer is
operating, Sleep Timer will be canceled.
PM 9:00 9:30 10:00 10:30
I I I I
Recording Timer Ii ! i ] I
SleepTimer ,_i 2 , ',
anceled.
HowSleepTimer actuallyworks
The unit automatically turns off after the specified time
length passes.
On the remote control ONLY:
1 Press SLEEP. _'_-_"
The time length until the shut-off time
appears and the SLEEP indicator s'tarts
flashing on the display.
• Each time you press the button, the time length changes
as follows:
FSLEEP 10--,--SLEEP 20--,.-SLEEP 30--_ SLEEP 601
Canceled --- SLEEP 120 -,- SLEEP 90
2 Wait fbr about 5 seconds after specif)4ng the
time length.
The SLEEP indicator stops flashing and remains lit.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time (minute) until the
shut-off time appears for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly so that the
SLEEP indicator goes off.
• Sleep Timer is also canceled when you turn off the unit.
- 25 -