Manual

Usingthe Timers
Continued I_
There are three timers available DAILY (Daily Timer), REC
(Recording Timer), and SLEEP (Sleep Timer).
Betbre using the timers, you need to set the clock built in the
unit. (See page 9.)
UsingDailyTimer
With Daily Timer, you can be awaken with your t_,vorite
music or radio program.
You can set the timer whether the unit is on or off; however, if
Ecology, Mode is activated, you cannot set the clock while the
unit is off.
HowDailyTimer actuallyworks
The unit automatically turns on, sets the volume level to the
preset level, and starts playing the specified source when the
on-time comes ("DAILY" and the DAILY (Daily Timer)
indicator flash just betbre the on-time, and the DAILY (Daily
Timer) indicator continues flashing while the timer is
operating). Then, when the off-time comes ("DAILY OFF"
flashes just betbre the off-time), the unit automatically turns
off (on standby).
The Daily Timer works everyday automatically. If you do not
want to use the Daily Timer, turn off the Daily timer. (See
"To turn on or off Daily Timer after its setting is done" on
page 23.) The timer setting remains in memory until you
change it.
• There is a time limit in doing the tbllowing steps. If the setting
is canceled beIbre you finish, start from step I again.
• To correct a mis-entry while setting the timer, press
CANCELiDEMO.
Before you start...
• When using a CD as"the source to play--
Make sure there is a CD on the selected disc number
tray,.
• When using a tape as the source to play--
Make sure that a 'tape is in the cassette deck.
Make sure that the tape direction is correct.
• When using the external component as the source to
play_
- Set the timer equipped on the external component at
the same time.
On the unit ONLY:
1Press CLOCK/TIMER _q_g_
W"
repeatedly until "DAILY"
appears on the display.
(Timer) indicator lights up andthe DAILY (Daily Timer)
indicator also starts flashing on the display.
[i
ii,-91L v
• Each time you press the button, the timer setting modes
change as tbllows:
(Daily Timer setting)
Canceled 4-- Clock _ TIMER
setting (Recording Timer setting)
(The hour digits start flashing.)
2 Press CLOCK/TIMER again.
"TIMER" appears tbr 2 seconds, then the
unit enters on-time setting mode.
U lq
rs s: :;;;;;,
........ I_#1 I :1" P--I lWl
I, :au
3 Set the on-time you want the unit
to turn on at.
1) Turn _ / _ to set the hour, then
press SET/DISPLAY.
"SET" appears tbr 1 second.
2) Turn _ / _ to set the minute,
then press SET/DISPLAY.
"SET" appears tbr 1 second, then
the unit enters off-time setting
mode.
!
SET!
DISI_LAY
- 22 -