Manual
PICTURESOURCE
You can obtain optimal picture quality by selecting an
appropriate option--picture source type (either video source
or fihn source).
Select one of the following:
AUTO: Normally select this.
When playing back a disc containing both video
arrd film sources, the System automatically
changes tire processing to match it to the picture
type (fihn or video source) of the current chapter.
FILM: To play a film source disc.
VIDEO: To play a video source disc.
SCREENSAVER
You can activate or deactiw_te screen saver while operating
the built-in disc player.
Select one of the following:
ON: Tile picture on tire TV becomes (lark when no
operation is done for about 5 minutes.
OFF: To cancel the screen saver.
FILETYPE
If both arrdio tracks (MP3 files) and still picture (JPEG files)
are recorded on a disc, you can select which to play.
Select one of the following:
AUDIO: To play MP3 files.
STILL PICTURE: To play JPEG files.
• AUDIOSet up Menu
You can adjust tire sound settings of tire System.
DIGITALAUDIOOUTPUT
When using tile digital output terminal on tile rear, set this
correctly according to tire connected component.
Select one of the following:
PCM ONLY: To connect to a linear PCM digital
equipment such as an MD recorder.
DOLBY DIGITAL To connect to a Dolby Digital decoder
/PCM: or an amplifier with a built-in Dolby
Digital decoder.
STREAM/PCM: To connect to a DTS decoder or an
amplifier with a built-in DTS decoder.
• See also "OPTICAL DIGITAL OUTPUT Signals" on
page 41.
DOWNMIX
When playing a multi-channel DVD, the System converts
the signals irrto 2 channels.
Down mix setting is effective for the speaker output (and
digital audio output if "DIGITAL AUDIO OUTPUT" is set
to "PCM ONLY") fronl this System.
Select one of the following:
STERE(): To connect a conventional stereo
amplifier, receiver, MD player, TV, etc.
DOLBY To connect an amplifier with the Dolby
SURROUND: Pro Logic decoder.
35