User Guide

EN9
Macintosh
ENGLISH
GETTING STARTED
Operating Environment
CAUTION:
● Operate this equipment according to the operating procedures described in this manual.
● Use only the provided CD-ROM. Never use any other CD-ROM to run this software.
● Do not attempt to modify this software.
● Changes or modifications not approved by JVC could void user’s authority to operate the
equipment.
How to handle a CD-ROM
n Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not
write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty,
gently wipe it with a soft cloth outward from the centre hole using a circular motion.
n Do not use conventional disc cleaners or cleaning spray.
n Do not bend the CD-ROM or touch its mirror surface.
n Do not store your CD-ROM in a dusty, hot or humid environment. Keep it away from
direct sunlight.
CAUTION:
This software may not operate properly on a Power Macintosh 4400, 5400 or 6400 series
computer, or on a PowerBook 2400 or 3400. For use with these systems, we recommend
upgrading your OS version as follows.
Power Macintosh 4400 series or PowerBook 2400 and 3400: Upgrade to Mac OS 8.0
Power Macintosh 5400 and 6400 series: Upgrade to Mac OS 7.6.1 or higher
q An Apple
®
Macintosh
®
computer with a 68040 processor or faster/PowerPC
601 or faster
q OS: Apple
®
system software version 7.5.5 to 8.1
q RAM requirement: at least 16 MB
q Available Hard Disk space of at least 70 MB
(DS SERIAL TWAIN Driver: 25 MB, MGI PhotoSuite SE: 45 MB)
q Colour display capable of at least 640 x 480 pixels, 256 colours
Recommended 1280 x 1024, 32000 colours
q RS-422 (Modem or printer) port
q CD-ROM drive
* Apple
®
and Macintosh
®
are trademarks of Apple Computer Inc., registered in
the U.S.A. and other countries.
* Other product and company names included in this instruction manual are
trademarks and/or registered trademarks of their respective holders.
* MGI PhotoSuite SE is a trademark of MGI Software Corp.