DVD Player & Video Cassette Recorder Instructions
Filename [XVC33UM_06Index.fm]
Masterpage:Left+
14
EN
Page 14 9 September 2003 9:26 am
INSTALLING YOUR NEW UNIT (cont.)
S-VIDEO 
Connection
(DVD deck only)
8
To connect to a TV with S-VIDEO/AUDIO input 
connectors . . .
A
Connect the unit to TV.
A
Connect the antenna, unit and TV as per “AV 
Connection”. (
墌
pg. 13)
B
Connect the unit’s S VIDEO OUTPUT (DVD) 
connector to the TV’s S-VIDEO input connector.
B
Connect the unit to power source.
Plug the end of the AC power cord into an AC outlet.
C
Set the VCR channel to off.
A
When the unit is turned off, press 
STOP
 (
8
) on the unit 
for more than 5 seconds. “3 CH” appears on the front 
display panel.
B
Press 
CH +/–
 on the Remote to select “– CH” (off), 
then press 
OK
.
● If Plug&Play or Tuner setting has not previously been 
performed, the Language Select screen appears and Plug&Play 
takes place automatically.
NOTES:
● You can obtain high-quality S-VHS pictures when you play 
back discs on the DVD deck.
● If your TV is not stereo-capable, use the unit’s AUDIO 
OUTPUT connectors to connect to an audio amplifier for 
Hi-Fi stereo sound reproduction.
● To operate the unit with your TV using the S-VIDEO 
connection, set your TV to its AV mode. You can also use the 
TV/VCR
 button on the unit’s Remote to set your TV to the AV 
mode. (
墌
pg. 73)
● For switching the TV’s mode, refer to the instruction manual of 
your television.
A
TTENTION
Be sure to connect the unit’s VIDEO OUTPUT (DVD/
VCR) connector to the TV’s VIDEO input connector.
COAXIALOPTICAL
PCM/STREAM
TV
To S-VIDEO input
connector
AUDIO OUTPUT
S-Video cable
(not supplied)
Audio/video
cable
(not supplied)
AC outlet
AC power cord
Back of unit
RF cable
(supplied)
S VIDEO OUTPUT
Antenna or Cable
Matching transformer 
(not supplied)
Coaxial cable
Flat feeder
VIDEO OUTPUT
To 75 ohm 
Ter mi na l
VHF/UHF
OUT
VHF/UHF 
IN
Before performing the following steps:
●
Make sure there is no cassette inserted in the unit.
●
Make sure the unit is turned on, then press 
VCR/
DVD
 on the unit or 
VCR
 on the Remote so that the 
VCR indicator lights up.
XVC33UM_06Index.fm Page 14 Tuesday, September 9, 2003 9:27 AM










