Projection Television Users Guide

Button Functions

Turns the TV on or off.

Press the P

OWER button

Note:

• After turning the power on, you can not turn the power off for about one minute.

Power

Use the number buttons on the remote control to move directly to a specific channel. For

example, to move to channel 12:

0 (Zero)

1 (One)

2 (Two)

Number Buttons - 10Key Pad

Tune

Selects the signal input source for the television: VIDEO-1, 2, 3, 4, DIGITAL-IN1 or

DIGITAL-IN2 for video devices like VCRs, DVD players or camcorders.

Press the I

NPUT button

By every press of the I

NPUT button, you can change the input mode.

Notes:

• When you return to TV mode, press the RETURN +/TV button or direct 10 key pad or CHANNEL

+/– button.

• You can also access by pressing the INPUT button on the side of the TV instead of the remote

control.

• If you have a PC connected to the TV, select VIDEO-3

Input

Lets you decide the input channel and select it. After you press the number buttons on the

remote, press the T

UNE button. For example, to move to channel 12:

1 (One)

2 (Two)

Press the T

UNE button

LCT2170-001C-A Eng.indd 64LCT2170-001C-A Eng.indd 64 12/20/06 9:16:04 AM12/20/06 9:16:04 AM