SeparateVolume
B5A-1634-00
2
© 2016 JVC KENWOOD Corporation
Ease function added to Preset Zoom
This function helps to smoothen the speed transition at the start and
end of the Preset Zoom operation.
[Ease In] added to menu item
[Ease In] is added to [Camera Function]
→
[User Switch Set].
This item is for setting the speed transition at the start of the Preset Zoom
operation. The larger the setting value, the smoother the transition.
[Setting Values: ● Off, 1~5]
[Ease Out] added to menu item
[Ease Out] is added to [Camera Function]
→
[User Switch Set].
This item is for setting the speed transition at the end of the Preset Zoom
operation. The larger the setting value, the smoother the transition.
[Setting Values: ● Off, 1~5]
Memo :
●
If “Off” is selected, the Ease function is disabled.
●
When [Camera Function]
→
[Zoom Control] is set to “Power Zoom”, this
item appears as “Off” and cannot be selected.
“98%” added to setting value of zebra pattern
This convenient setting is added to keep the video level within 100%
during the video production for playback, screening and broadcasting
on nonlinear devices and PC.
“98%” added to [Top] and [Bottom] of menu item [Zebra]
“98%” is added to the setting values for specifying the upper and lower
limits of the luminance level in [LCD/VF] → [Shooting Assist] →
[Zebra]/[Top] and [Bottom].
[Top] [Setting Values: 5% to ● 80% to 95%, 98%, 100%, Over]
[Bottom] [Setting Values: 0% to ● 70% to 95%, 98%, 100%]
Improved LCD backlight brightness
A brightness setting that is 2 times the existing brightness setting has
been added.
This improves the visibility and allows for more delicate focusing.
Setting Values added to menu item [LCD Backlight]
The brightness is improved by changing the setting value of [LCD/VF]
→ [LCD Backlight]. Increasing the value increases the brightness.
[Setting Values: -1, ● 0, +1]
SMPTE 2022-1 FEC supported
MPEG2-TS/RTP is added to streaming type and SMPTE2022-1 FEC is
supported.
Also, the “MPEG2-TS/TCP” setting value is removed.
“MPEG2-TS/RTP” added to menu item [Type]
“MPEG2-TS/RTP” is added to [System]
→
[Network]/[Settings]
→
[Live
Streaming Set]
→
[Server]/[Streaming Server]
→
[Server1] to [Server4]
→
[Type].
[Setting Values: ● MPEG2-TS/UDP, MPEG2-TS/RTP, RTSP/RTP,
ZIXI, RTMP]
Note :
● With the addition of this setting value, “MPEG2-TS/TCP” is removed
from the setting values of [Type].
[SMPTE 2022-1 FEC] added to menu item
When “MPEG2-TS/RTP” is selected in [System]
→
[Network]/[Settings]
→
[Live Streaming Set]
→
[Server]/[Streaming Server]
→
[Server1] to
[Server4]
→
[Type], [SMPTE 2022-1 FEC] can be configured. Set to
“On” to use FEC (Forward Error Correction). This is a transmission
system that recovers the missing packets in the decoding process
without having to retransmit the missing packets.
[Setting Values: On, ● Off]
T The decoder must be compatible with SMPTE 2022-1.
[FEC Matrix] added to menu item
For setting the amount of FEC (Forward Error Correction) overhead for
configuring SMPTE 2022-1.
Memo :
●
This item is selectable only when [SMPTE2022-1 FEC] is set to “On”.
● When [Type] is set to “MPEG2-TS/RTP”, only even numbers from 2 to
65530 can be specified as the port number for the transmission
destination port.
● When [Type] is set to “MPEG2-TS/RTP” and [SMPTE2022-1 FEC] is
set to “On”, N+2 and N+4 port numbers are also used in addition to the
port number (N) specified for the transmission destination port.
Setting the FEC Matrix
Set the amount of “FEC” (Forward Error Correction) overhead for
configuring [SMPTE 2022-1].
1 Select [System] → [Network]/[Settings] → [Live Streaming Set] →
[Server]/[Streaming Server] → [Server1] to [Server4] → [Type] →
[FEC Matrix], then press the Set button ( ● ).
The FEC adjustment screen appears.
2 Adjust the L and D values.
Use the H / I buttons to adjust the L value, and the J/K buttons to
adjust the D value.
The amount of FEC overhead changes when the L and D values are
changed.
To restore the L and D values to their default values, press the
[C.REVIEW/4] button.
Memo :
●
Setting range
• 4 ≦ L ≦ 20 (Default value: L = 10)
• 4 ≦ D ≦ 20 (Default value: D = 10)
• L × D ≦ 100 (Default value: L×D = 10×10)
3 Press the Set button ( ● ).
The screen returns to the streaming server setting screen.
Memo :
●
Increasing the amount of FEC overhead increases the packet loss
resilience but more network bandwidth is used.
● Even with the same amount of overhead, increasing the L value will
increase the packet loss (continuous packet loss) resilience.
High reliability mode added to ZIXI
High latency (high reliability) mode is added to ZIXI.
“High” is added to menu item [Latency]
“High” is added to [System]
→
[Network]/[Settings]
→
[Live Streaming
Set]
→
[Server]/[Streaming Server]
→
[Server1] to [Server4]
→
[Latency].
[Setting Values: High, Medium, ● Low, Minimum (ZIXI Off)]
Importer (EU only)
12 Priestley Way, London NW2 7BA, UNITED KINGDOM
Importeur (Nur EU)
Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, DEUTSCHLAND
Importateur (EU uniquement)
7 Allee des Barbanniers, CS20034 92632 Gennevilliers Cédex, FRANCE
Importatore (Solo EU)
Via G. Sirtori 7/9, 20129 Milano, ITALIA
Importador (Solamente EU)
Ctra. Rubi, 88 Edifi cio Can Castanyer, 08174 Sant Cugat del Valles,
Barcelona, ESPAÑA
Importeur (Alleen EU)
Leuvensesteenweg 248J, 1800 Vilvoorde, BELGIQUE
Importeur (Alleen EU)
Amsterdamseweg 37, 1422 AC Uithoorn, NEDERLAND
Manufacturer
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022,
JAPAN
GY-LS300Sheet2_EN.fm 2 ページ ２０１６年５月２３日 月曜日 午後５時１９分