INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Variable Scan Mapping (VSM)
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Setting to Auto Focus Temporarily
(Push Auto Focus)
0
If [Push AF/AF Lock
] is assigned to the user
button, the camera recorder will shift to Auto
Focus mode temporarily and automatically
adjusts focus when the assigned user button is
held down during shooting in Manual Focus
mode.
0
Release
the user button assigned with [Push AF/
AF Lock] to return to Manual Focus mode.
Memo :
0
Face
detection does not work during Push Auto
Focus.
Locking the Focus
When the [Push AF/AF Lock] function is assigned
to a user button in the Auto Focus mode, pressing
this button locks the focus on the corresponding
point.
A Z
icon appears on the left side of the e icon when
the focus is locked.
Memo :
0
Performing any focusing operation when the
focus is locked disengages the focus lock.
Adjusting Focus Manually
Memo :
0
To adjust the focus when using a lens without
focus ring, set
[Main Menu] B [Camera
Function] B [Grip Zoom] to “Focus” to enable
focusing using the zoom lever at the grip.
(A P98
[ Grip Zoom F ] )
1
Press the [AF/MF
] selection button to set to
Manual Focus mode.
The manual focus icon d appears on the
screen.
.
1/100
F1. 6
18
dB
AE+6
ND 1 / 16
12 :34 :56
Jan 24,2014
00:00: 00.00
5 . 6 f t
4030 20 10 0
P 150 00 K
Memo :
0
The d icon
appears even when [Main Menu] B
[LCD/VF] B [Display Settings] B [Focus] is set
to “Off”.
(A
P108 [ Focus F ] )
2
Operate the focus manually to adjust the
focus.
Memo :
0
Using the Focus Assist or Expanded Focus
function makes it easier to focus.
(A P53
[Focus Assist Function] )
(A P53 [Expanded Focus Function] )
0
If [Push AF/AF Lock] is assigned to the user
button, pressing the assigned user button while
in the Manual Focus mode activates the One-
push Auto Focus mode, and holding down the
button activates the Push Auto Focus mode.
(A
P51 [One Push Auto Focus] )
(A P52 [Setting to Auto Focus Temporarily
(Push Auto Focus)] )
AF Assist Function
Memo :
0
To
use this function, set [Main Menu] B [Camera
Function] B [Grip Zoom] to “Focus” to enable
focusing using the zoom lever at the grip.
(A P98
[ Grip Zoom F ] )
0
The focus function may not work depending on
the lens used.
This option allows you to shift the auto focus point
to near and far directions by operating the focus
manually during AF.
Focus is automatically adjusted to a focus point
near the position where the focus cannot be
operated further.
0
Set [Main Menu] B [Camera Function] B [AF
Assist] to “Far/Near”.
52
Focus Operation F
Shooting