INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Variable Scan Mapping (VSM)
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
2
Save the current zoom position.
0
Press any of the user buttons assigned with
the “Preset Zoom1
”, “Preset Zoom2”, or
“Preset Zoom3” function for more than 1
second.
0
The current zoom position will be stored.
3
Recall the stored zoom position.
0
Press any of the user buttons assigned with
the “Preset Zoom1
”, “Preset Zoom2”, or
“Preset Zoom3” function and release within 1
second.
0
The camera recorder zooms to the stored
zoom position.
Memo :
0
The
zoom speed to the zoom position can be set
in [Main Menu] B [Camera Function] B [User
Switch Set] B [Preset Zoom Speed].
(A P
100 [ Preset Zoom Speed F ] )
0
Operating other zoom maneuvers during a
zoom position recall will cancel the recall.
0
Depending on the lens used, the zoom position
that was recalled may be different from the
position stored.
Focus Operation F
.
Adjusting Focus Automatically
1
Press the [
AF/MF] selection button to set to
Auto Focus mode.
The auto focus icon e appears on the screen.
Memo :
0
If
[Main Menu] B [Camera Function] B [AF
Assist] is set to “Far/Near”, you can shift the auto
focus point using manual focusing operation
while in the automatic focus adjustment mode.
0
When
face detection is enabled, the Auto Focus
icon e appears with the face mark.
(A P54 [Adjusting the Focus by Face
Detection F] )
(A P99 [ Face Detect F ] )
0
If there is an AF/MF switch on the lens used, set
the switch to MF to disable Auto Focus. Even if
the switch is set to AF, the focus cannot be
automatically adjusted depending on the lens.
One Push Auto Focus
If [Push
AF/AF Lock] is assigned to the user button,
pressing the assigned user button (within 1 minute)
while in the Manual Focus mode makes the camera
recorder focus on the center of the frame
automatically.
Memo :
0
Face detection does not work during One Push
Auto Focus.
0
AF Assist does not function.
0
When the operation is complete, the camera
recorder returns to the Manual Focus mode
automatically.
0
One Push Auto Focus functions with emphasis
on the focusing speed. This function is not
suitable during recording.
Zoom Operation F
51
Shooting