INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Variable Scan Mapping (VSM)
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
N
ND Filter Position
Displays the current ND filter position.
Memo :
0
This item is not displayed when
[Main Menu] B
[LCD/VF] B [Display Settings] B [ND Filter] is
set to “Off”.
(A P
109 [ ND Filter ] )
0
Displayed in the Display 0 screen only when
there is a change.
O
Focus Display
0
Displays the approximate distance to the
subject in focus during manual focus.
0
There
is no icon display in Auto Focus mode.
However, the Auto Focus icon e appears
with q only when face detection is enabled.
(A P54 [Adjusting the Focus by Face
Detection F] )
(A P99 [ Face Detect F ] )
Memo :
0
This item may not be displayed depending on
the lens used.
0
You can specify the display method (Feet/
Meter) in
[Main Menu] B [LCD/VF] B [Display
Settings] B [Focus].
This item will not be displayed when “Off” is
selected.
(A
P108 [ Focus F ] )
0
Displayed in the Display 0 screen only when
there is a change.
P
Focus Assist
0
“FOCUS
” is displayed when auto focus is
activated.
(A P
107 [ Focus Assist ] )
Memo :
0
Displayed in the Display 0 screen only when
there is a change.
Q
Date/Time Display
Displays the current date and time.
Memo :
0
The date/time display style can be specified in
[Main
Menu] B [LCD/VF] B [Display Settings] B
[Date Style]/[Time Style].
(A P
110 [ Date Style ] )
(A P110 [ Time Style ] )
0
This item is not displayed when [Main Menu] B
[LCD/VF] B [Display Settings] B [Date/Time] is
set to “Off”.
(A P
109 [ Date/Time ] )
0
When [Main Menu] B [System] B [Record Set]
B [Time Stamp] is set to “On”, this item is not
displayed.
(A P119
[ Time Stamp ] )
R
Zoom Display
0
Displays
the zoom position. (Zoom bar, value
or focal length)
.
0
The zoom bar will only be displayed for 3
seconds after the zoom operation is
activated.
0
The value or focal length will always be
displayed.
Value: Z00 to 99
Focal length: ** mm (** denotes number)
Memo :
0
This item may not be displayed depending on
the lens used.
0
You can specify the display method (Focal
Length/Number/Bar) in
[LCD/VF] B [Display
Settings] B “Zoom”.
This item will not be displayed when “Off” is
selected.
(A P
108 [ Zoom F ] )
0
Displayed in the Display 0 screen only when
there is a change.
132
Display Screen in Camera Mode
Display/Status Screen