INSTRUCTIONS

PRESET AUTO Item
For performing settings of each operation item
when the [AUTO MODE FULL/PRESET/OFF]
switch has been set to
“PRESET”.
Gain
For specifying the Gain operation.
0
SW Set:
Follows the setting of the [GAIN] switch.
0
AGC:
Sets the gain to Auto.
[Setting Values: SW Set, RAGC]
Iris Control
For specifying the Iris control operation.
0
SW Set:
Follows the setting of the [IRIS A/M] button.
0
Auto:
Sets the iris to Auto.
[Setting Values: SW Set, RAuto]
Memo :
0
This item can be specified even if the lens used
does not have iris function.
Shutter
For specifying the Shutter operation.
0
SW Set:
Follows the setting of the
[SHUTTER] button.
0
EEI:
Sets the shutter to Auto.
[Setting Values: SW Set, REEI]
White Balance
For specifying the White Balance operation.
0
SW Set:
Follows the setting of the
[WHT BAL] switch.
0
FAW:
Sets the white balance to Auto.
[Setting Values: SW Set, RFAW]
Bars
For specifying the color bar operation.
0
Menu Set:
Follows the setting of
[Main Menu] B [Camera
Function] B [Bars].
0
Off:
Does
not display the color bar regardless of the
setting in [Main Menu] B [Camera Function] B
[Bars].
[Setting Values: Menu Set, ROff]
Camera Process Menu
Menu screen for adjusting the quality of camera
images.
This item cannot be selected in the Media mode.
Detail
For adjusting the contour (detail) enhancement
level.
Increasing the value increases the sharpness of
the contour.
[Setting Values: -10 to +10, Off (R0)]
9
Adjust...
For specifying the detailed settings of the contour
(detail).
(A
P104 [Detail/Adjust Item] )
Memo :
0
This
item cannot be selected when [Detail] is set
to “Off”.
Master Black
For
adjusting the pedestal level (master black) that
serves as the reference black.
Increasing the value increases the pedestal.
[Setting Values: -50 to +50 (R-3)]
Black Toe
Process
the dark areas according to the balance of
bright and dark areas in the image to adjust the
overall balance of contrast.
For altering the gain of dark areas. Adjust this item
according to the condition of the captured video
signals.
0
Stretch:
Increases the gain of dark areas in an image to
stretch the signals of these areas only, thereby
showing the contrast between bright and dark
areas more clearly.
Specify the amount of stretch with [Stretch
Level
].
0
Normal:
Normal condition.
0
Compress:
Compresses the gain of dark areas to increase
the contrast when the entire image appears
bright and contrast is weak. Specify the
compression amount with [Compress Level
].
[Setting Values: Stretch, RNormal, Compress]
Memo :
0
When [WDR] is set to other than “Off”, this item
appears as
“---” and cannot be selected.
Camera Function Menu
101
Menu Display and Detailed Settings