User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
White Paint Adjustment
You can fine-tune the white balance saved in
Memory A or Memory B.
1
Select [Main Menu] B [
Camera Process] B
[White Balance] B [AWB Paint] and press
the Set button (R).
The White Paint Adjustment screen appears.
.
1
2
Adjust the R and B values.
Use the cross-shaped button (JK) to adjust R
value and (HI) to adjust B value.
.
3
Press the Set button (R).
Returns to the [White Balance] screen.
.
B Value
R Value
Memo :
0
Selecting [y]
will usually clear the White Paint
Adjustment value. But when [Main Menu] B
[Camera Process] B [White Balance] B [Clear
Paint After AWB] is set to “Off”, values will not
be cleared even when [y] is selected.
(A P106
[ Clear Paint After AWB ] )
0
If [White Balance] has been assigned to the user
button, pressing the assigned user button will
display the AWB Paint Adjustment screen.
(A P
38 [Assignment of Functions to User
Buttons] )
Automatic White Balance Mode (FAW:
Fulltime Auto White balance)
0
Press the
[WHT BAL] button on the side control
panel to enter into Automatic White Balance
mode.
0
“<FAW>” appears on the screen.
0
Set the [FULL AUTO] switch on the camera
recorder to “ON
” to enter Automatic White
Balance mode. An appropriate white balance is
automatically adjusted according to the color
temperature of the lighting on the object.
0
White balance switching with the
[WHT BAL
B/A/PRESET] selection switch is disabled.
.
1/100
F1. 6
0
dB
AE+6
ND 1 /64
12 :34 :56
Jan 12, 2016
00: 00:00.00
4030 20 10 0
5 . 6 f t
FAW
FAW
Caution :
0
The accuracy of
[FAW] is inferior to that of Auto
White Balance.
0
When the power of the camera recorder is
turned
on with the [FAW] mode selected, it takes
about 15 seconds for the colors to stabilize.
Memo :
0
When [Main Menu]
B
[Camera Function]
B
[User
Switch Set]
B
[AE Lock] is set to “AE/WB”, the
white balance when the user button that is
assigned [AE Lock] is pressed can be fixed.
(A P101 [ AE Lock ] )
0
If [White
Balance] has been assigned to the user
button, pressing the assigned user button will
display the FAW Paint Adjustment screen.
(A P
38 [Assignment of Functions to User
Buttons] )
61
Shooting