User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Setting the Electronic
Shutter
You can change the shutter speed (time for each
shooting frame) using the electronic shutter
function. Electronic shutter can be adjusted
manually or automatically.
Manual Shutter Mode (Manual Shutter
Switching)
1
Press the [SHUTTER] button to set to the
Manual Shutter mode.
0
The a icon on the screen disappears.
0
Use the Set button (R) to switch between the
shutter modes and the cross-shaped button
(JK) to switch between the speeds.
.
AE LEVEL
PUSH
AUT
O
AE LEVEL
MENU/THUMB
GAIN
CANCEL
WHT BAL SHUTTER
FULL AUTO
ON
OFF
Switching Shutter Mode
Press the Set button (center of the cross-shaped
button) to turn ON/OFF the shutter.
Memo :
0
When
the shutter is ON, “Step” or “Variable” may
be selected in [Camera Function] B [Shutter].
“Step” is the factory default.
(A P98
[ Shutter ] )
Switching Shutter Speed
When shutter is ON, use the cross-shaped button
(JK)
to set the shutter speed. Shutter speed differs
according to the video format and variable frame
rate settings.
Memo :
0
To
display Shutter in angle (DEG), set [WFrame
& Bit Rate] to “24p(UHQ)”, “24p(HQ)” or
“25p(HQ)”, and set [Shutter] in [LCD/VF] B
[Display Settings] to “DEG”.
(A P
118 [WFrame & Bit Rate a, Frame & Bit
Rate b] )
(A P111 [ Shutter ] )
During Modes Other Than Variable Frame Rec
.
720/60p
720/30p
1080/60p
1080/60i
1080/30p
720/50p
720/25p
1080/50p
1080/50i
1080/25p
720/24p
1080/24p
J ON
^^
1/10000
1/4000
1/2000
1/1000
1/500
1/250
1/500 1/500
1/120
1/100
1/120
1/60
1/100 1/100 1/50
1/60 1/50 1/48
1/30 1/25 1/24
1/15 1/12.5 1/12
K
1/7.5 1/6.25 1/6
J ON
~
1/60.13 1/50.09 1/48.09
~
K
1/30.07 1/25.05 1/24.05
OFF 1/60 1/50 1/48
1/10227
1/10843
1/54
1/10000 1/10000
1/250 1/250
1/120
1/1000 1/1000
1/2000 1/2000
1/4000 1/4000
(Lower limit)
Default values
(Upper limit)
(Standard)
(Variable)
(Step)
Resolution/
Frame &
Bit Rate
Shutter
Memo :
0
The operations of the cross-shaped button
(JK) and Set button (R) are disabled in the
following cases.
0
During clip preview
0
During display of the USB switching
confirmation screen
0
During display of the formatting confirmation
screen
0
When selecting a face using face detection
0
When
selecting a photometry area with [Spot
Meter] set to “Manual”
56
Shooting