User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
No. of Frames for
W
Frame & Bit
Rate
Resolution
Setting values
(R: default value)
60p, 60i, 30p 1920x1080 60i (12.0 M),
R 60i (8.0 M) (*1),
60i (5.0 M),
60i (3.0 M)
1280x720 30p (8.0 M),
30p (5.0 M),
30p (3.0 M),
30p (1.5 M)
720x480 60i (8.0 M),
60i (5.0 M),
60i (3.0 M),
60i (1.5 M),
60i (0.8 M),
60i (0.3 M)
640x360 30p (3.0 M),
30p (1.5 M),
30p (0.8 M),
30p (0.3 M)
50p, 50i, 25p 1920x1080 50i (12.0 M),
R 50i (8.0 M) (*2),
50i (5.0 M),
50i (3.0 M)
1280x720 25p (8.0 M),
25p (5.0 M),
25p (3.0 M),
25p (1.5 M)
720x576 50i (8.0 M),
50i (5.0 M),
50i (3.0 M),
50i (1.5 M),
50i (0.8 M),
50i (0.3 M)
640x360 25p (3.0 M),
25p (1.5 M),
25p (0.8 M),
25p (0.3 M)
*1 Default value for U model
*2
Default value for E model
Memo :
0
The settings cannot be changed during live
streaming.
0
An
encoding bit rate exceeding 5.0 Mbps cannot
be selected when [Type] is set to “MPEG2-
TS/RTP” or “RTSP/RTP”.
0
An
encoding bit rate exceeding 5.0 Mbps cannot
be selected when [Type] is set to “ZIXI” and
[Latency] is set to other than “Low”.
0
An
encoding bit rate exceeding 3.0 Mbps cannot
be selected when [Type] is set to “ZIXI” and
[Latency] is set to “Low”, or when [Type] is set to
“RTMP”.
Connection Setup
For specifying the settings for connecting to the
network.
A [Wizard] screen will appear according to the
adapter connected to the rear [
HOST] terminal.
Follow the instructions to perform the setting.
You can Load, Store, and Delete the settings
specified on the [Wizard] screen.
9
Wizard
A [Wizard]
screen appears according to the type of
adapter that is connected to the rear [HOST]
terminal.
Follow the instructions.
9
Load
Loads the settings on the [Wizard
] screen.
(A P174 [Reading the Connection Settings
File] )
9
Store
Saves the settings on the
[Wizard] screen.
(A P173 [Saving the Connection Settings File] )
9
Delete
Deletes the saved settings.
(A P
174 [Deleting Connection Settings] )
9
APN
For specifying APN (Access Point Name).
*
This item is grayed out and cannot be selected if
APN cannot be set for the adapter attached.
Caution :
0
The APN setting is written into the cellular
adapter, not this camera recorder.
Setting a wrong APN may result in
communication failure or expensive bills from
the
telecommunications company. Set the APN
correctly.
(A P152 [Connecting via Cellular Adapter] )
Metadata Server
For registering the FTP server for importing the
metadata and the path of the file to be imported.
Up to 4 settings can be registered.
125
Menu Display and Detailed Settings