User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Configuring Settings via a Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
.
AUX
INPUT2
INPUT1
DEVICE
AV
A
BATT.RELEASE
POWER
/CHG
B
HDMI
REMO
TE
DC
SD/HD
SDI
REC
HOST
AV
DEVICE
DC
REMOTE
HOST
SDI IN
HDMI
AV input
Clamp Filter
(supplied)
Wire Clamp
(supplied)
* Select the output signal in [A/V Set]
B
[HDMI/SDI Out].
(A P111 [ HDMI/SDI Out ] )
*
When [Record Format]
B
[System] is set to “SD”,
only SD-SDI signals are output.
(A P116 [ System ] )
* To display the menu screen or display screen on an
external monitor, set [A/V Set]
B
[Video Set]
B
[Display On TV] to “On”.
(A P111 [ Display On TV ] )
Connecting via SDI
0
Digital video signals, together with embedded
(superimposed) audio signals and time code signals,
are output for both the HD-SDI and SD-SDI signals.
0
User’s bit output from the [HD/SD SDI] output terminal
is used as a flag to determine valid video signals.
Therefore, accurate values will not be output.
Memo :
0
The sampling frequency for embedded
(superimposed) audio signals is 48 kHz. Time code
of the built-in time generator as well as playback time
code are also output.
Settings for SDI Down-Converted Output
0
You can select the method to “down convert” HD
video images to SD images during SD-SDI output.
0
Set using [A/V Set]
B
[Video Set]
B
[SD Aspect].
0
The available modes include “Side Cut”, “Letter”
(blackened at the top and bottom), and “Squeeze” (full
size, compressed at the left and right).
(A P118 [ SD Aspect ] )
Memo :
0
When [Record Format]
B
[System] is set to “SD”,
and [SD Aspect] is set to “4:3”, this item cannot be
selected.
(A P116 [ System ] )
144
Connecting External Devices