User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Configuring Settings via a Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Date/Time
For
specifying whether to display the date and time
in the display on the LCD monitor and viewfinder
screen.
[Setting Values: ROn, Off]
Date Style
For setting the date display sequence for display
on the LCD monitor and viewfinder screen as well
as for time stamp recording.
Display examples of the setting values are as
follows.
0
DMY2: 30 Jun 2012
0
DMY1: 30-06-2012
0
MDY2: Jun 30, 2012
0
MDY1: 06-30-2012
0
YMD: 2012-06-30
[Setting Values: DMY2, DMY1, MDY1, MDY2,
YMD]
(Default values: MDY2 (U model), DMY1 (E
model))
Time Style
For setting the time display for display on the LCD
monitor and viewfinder screen as well as for time
stamp recording.
[Setting Values: 24hour, 12hour]
(Default values: 12hour (U model), 24hour (E
model))
Shutter
For setting the shutter display to be displayed on
the LCD monitor and viewfinder screen.
0
DEG:
Displays the shutter speed in degrees in the
same way as film cameras.
0
SEC:
Displays the shutter speed in seconds.
[Setting Values: DEG, RSEC]
Memo :
0
“DEG” is selectable only when [WFrame & Bit
Rate] is set to
“24p(UHQ)”, “24p(HQ)” or
“25p(HQ)”.
When [WFrame & Bit Rate] is set to other values,
the shutter display setting is fixed at “SEC” and
cannot be selected.
(A
P117 [ W Frame & Bit Rate ] )
A/V Set Menu
Menu screen for video output and audio.
Video Set...
For specifying video output-related settings.
(A
P111 [Video Set Item] )
Audio Set...
For specifying audio-related settings.
(A
P112 [Audio Set Item] )
Video Set Item
Display On TV
For
setting whether to display the display and menu
characters on the external monitor.
[Setting Values: On, ROff]
HDMI/SDI Out
For setting the terminal to output the video.
[Setting Values: HDMI+SDI, SDI, HDMI, ROff]
Memo :
0
When the [Network] setting is set to
“On(SDI
Off)”, “HDMI+SDI” and “SDI” are not selectable.
And when “On(HDMI Off)” is set, “HDMI+SDI”
and “HDMI” are not selectable.
9
Resolution
For
selecting the resolution of video output from the
[HDMI]/[SDI] terminal according to the monitor to
be connected.
[Setting Values: 576i, 576p, 480i, 480p, 720p,
R1080i]
Memo :
0
The selectable options vary according to the
setting in [System]/[WResolution]/[WFrame &
Bit
Rate] of [System] B [Record Set] B [Record
Format].
0
Cross conversion output is not possible.
9
HDMI Color
0
For setting the color format of HDMI signals.
0
This item is selectable only when
[HDMI/SDI
Out] is set to “HDMI” or “HDMI+SDI”.
[Setting Values: RGB, RAuto]
111
Menu Display and Detailed Settings