User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Others
Menu Screen Hierarchical
Chart
.
Reset Process
Reverse Picture
Color Gain
Adjust...
Color Matrix
White Balance...
WDR
Gamma
White Clip
Knee
Black Toe
Master Black
Adjust...
Detail
Camera Process...
User Switch Set...
AE LEVEL SW
Handle Zoom Speed
GAIN H
GAIN M
GAIN L
Smooth Trans
EEI Limit
Auto Iris Limit (CLOSE)
Auto Iris Limit (OPEN)
ALC Limit
AE Speed
AE Level
Shutter
Flicker Correction
OIS
Bars
Camera Function...
Main Menu...
Shooting Mode
AF Assist
Flash Band Correction
.
System Information
Time Zone
Date/Time
Reset All
Tally Lamp
Auto Power Off
Setup File...
Media...
Record Set...
System...
Audio Set...
Video Set...
A/V Set...
LCD Mirror
LCD Backlight
LCD Contrast
VF Contrast
VF Bright
VF Color
LCD + VF
Display Settings...
Marker Settings...
Shooting Assist...
LCD/VF...
Drop Frame
UB Preset
TC Preset
TC Generator
TC/UB...
Memo :
0
Some menus cannot be set depending on the operating mode or status of the camera recorder. These
items are displayed in gray, and they cannot be selected.
0
Setting value with the R mark is the factory default.
92
Menu Display and Detailed Settings