User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Others
Status Screen
0
This screen allows you to check the current
settings.
0
To display the status screen, press the
[STATUS] button in the normal screen.
0
The status display differs according to the
operation mode (two types).
(A P18 [Operation Modes] )
0
Press the [STATUS] button to switch to the
display screen.
0
Press the [MENU] button at each status screen
(other than the [Camera 1]/[Camera 2] screen)
to enter the setting screen.
0
Use the cross-shaped button (HI) to switch
screens as follows:
.
USB Mode Screen
This screen displays the USB mode.
.
Warning Display
0
Warning display is displayed in the display
screen (Camera mode, Media mode).
0
If error occurs during status screen display, the
display will return to the display screen to display
the warning.
(A P133 [Error Messages and Actions] )
.
P13000K
1/100
F1. 6
0
dB
AE+6
ND 1 /6 4
5 . 6 f t
12 :34 :56
Jan 24,2012
00:00: 00.00
4030 20
10
0
Warning Display Area
35
Preparations