User manual

T
Date/Time Display
Displays the current date and time.
Memo :
0
The date/time display style can be specified in
[Main Menu] B [LCD/VF] B [Display Settings]
B [Date Style]/[Time Style].
(A P104 [ Date Style ] )
(A P104 [ Time Style ] )
0
This item is not displayed when [Main Menu] B
[LCD/VF] B [Display Settings] B [Date/Time] is
set to “Off”.
(A P104 [ Date/Time ] )
0
When [Main Menu] B [System] B [Record
Set] B [Time Stamp] is set to “On”, this item is
not displayed.
(A P111 [ Time Stamp ] )
U
Zoom Display
0
Displays the zoom position. (Zoom bar or
value)
0
The zoom bar will only be displayed for 3
seconds after the zoom operation is
activated.
0
The value will always be displayed. (0 to 99)
Memo :
0
You can specify the display method (Number/
Bar) and whether to turn off the display in [LCD/
VF] B [Display Settings] B “Zoom”.
This item will not be displayed when “Off” is
selected.
(A P103 [ Zoom ] )
0
Displayed in the Display 0 screen only when
there is a change.
V
Time Code (I)/User’s Bit (J) Display
0
Displays the time code (hour: minute:
second: frame) or user’s bit data.
0
Example of time code display:
.
00:00:00:00
※
* Colon (:) denotes non-drop frames and dot (.)
denotes drop frames.
0
Example of user’s bit display:
.
FF EE DD 20
Memo :
0
You can specify whether to display the time
code, user’s bit, or turn off the display in
[LCD/VF] B [Display Settings] B [TC/UB].
This item will not be displayed when “Off” is
selected.
(A P104 [ TC/UB ] )
W
Time Code Lock Indicator
When the built-in time code generator is
synchronized to the external time code data
input during the synchronization of time code
with another camera recorder, Z lights up.
(A P66 [Synchronizing Time Code on Another
Camera] )
X
Event/Warning Display Area
Displays error messages.
(A P133 [Error Messages and Actions] )
119
Display/Status Screen