User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Others
D
Frame rate
Displayed as xx/yy fps (xx: recording frame rate,
yy: playback frame rate) only when [Rec Mode]
is set to “Variable Frame”.
(A P110 [ Rec Mode ] )
E
Resolution
Displays the video image resolution.
Memo :
0
This item is not displayed when [Main Menu] B
[LCD/VF] B [Display Settings] B [Record
Format] is set to “Off”.
(A P103 [ Record Format ] )
F
Frame Rate/Bit Rate
Displays the frame rate and bit rate in pairs.
Memo :
0
This item is not displayed when [Main Menu] B
[LCD/VF] B [Display Settings] B [Record
Format] is set to “Off”.
(A P103 [ Record Format ] )
G
Audio Level Meter
0
Displays the audio levels of CH1 and CH2.
0
a appears on the screen when in the Auto
mode.
.
4 030 20
10
0
0
When [Rec Mode] B [Rec Mode] is set to
“Frame Rec”, “Interval Rec”, or “Variable
Frame”, audio cannot be recorded and is
indicated by the x mark.
.
4 030 20
10
0
Memo :
0
This item is not displayed when [Main Menu] B
[LCD/VF] B [Display Settings] B [Audio Meter]
is set to “Off”.
(A P104 [ Audio Meter ] )
H
Volume Operation Indicator
Displayed when there are changes made to the
volume of the headphone, speaker (0 to 15),
and the values of LCD BRIGHT, PEAKING (-10
to +10).
.
12
LCD BRIGHT
PEAKING
-10
0
0
Memo :
0
There is no audio output from the speaker in
Camera mode.
I
Flash Band Correction Mark
This item is displayed when [Main Menu] B
[Camera Function] B [Flash Band Correction] is
set to “On”.
(A P93 [ Flash Band Correction ] )
J
Image Stabilizer Mark
Displayed when the image stabilizer is ON.
i
: When [Level] of [OIS] is set to
“Normal”.
j
: When [Level] of [OIS] is set to
“High”.
Memo :
0
If image stabilizer is set to “OFF” when the
Display 0 screen is displayed, h appears for 3
seconds.
0
Displayed in the Display 0 screen only when
there is a change.
K
White Balance Mode
Displays the current white balance mode.
(*****K indicates color temperature)
A<*****K> : When the white balance is set to
Auto A.
B<*****K> : When the white balance is set to
Auto B.
P<*****K> : When the white balance is set to
Preset.
a
<FAW> : During Full Auto White Balance
mode.
Z
<FAW> : When [AE LOCK] is set to “On”
during Full Auto White Balance
mode.
Memo :
0
Displayed in the Display 0 screen only when
there is a change.
117
Display/Status Screen