User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Others
TC Preset
For setting the time code (hour, minute, second,
frame).
Display : Drop setting 02:02:25.20
: Non Drop setting 02:02:25:20
UB Preset
For setting the user’s bit. (Digit by digit)
Display : AB CD EF 01
Drop Frame
For setting the framing mode of the time code
generator.
0
Non Drop:
Internal time code generator works in the non-
drop-frame mode. Use this setting when placing
emphasis on the number of frames.
0
Drop:
Internal time code generator works in the drop-
frame mode. Use this setting when placing
emphasis on the recording time.
[Setting Values: Non Drop, RDrop]
Memo :
0
This item can be set only when [Main
Menu] B [System] B [Record Set] B [Record
Format] B [Frame & Bit Rate] is set to “60p”,
“30p”, or “60i”. When the frame rate is “24p”,
“Non Drop” becomes fixed and cannot be
selected. When the frame rate is “50p”, “25p”, or
“50i”, this item appears as “---” and cannot be
selected.
(A P109 [ Frame & Bit Rate ] )
LCD/VF Menu
Item for specifying settings related to the LCD
monitor or viewfinder screen.
This menu screen can be used to specify settings
related to the Focus Assist mode, zebra pattern
display, screen size, marker, and safety zone. In
addition, it is also used for selecting whether to
display characters on the LCD monitor or
viewfinder screen, as well as for adjusting the
picture quality of the LCD monitor.
Shooting Assist...
Menu for setting the Shooting Assist function.
(A P102 [Shooting Assist Item] )
Marker Settings...
For setting items such as the safety zone and
center mark.
(A P103 [Marker Settings Item] )
Display Settings...
For specifying display-related settings.
(A P103 [Display Settings Item] )
LCD + VF
For selecting a method to switch between the LCD
monitor and viewfinder screen displays.
(A P36 [Adjusting the LCD Monitor and
Viewfinder] )
0
On:
Displays images on the viewfinder at all times.
0
Off:
Turns off the viewfinder screen display when the
LCD monitor is turned on.
[Setting Values: On, ROff]
VF Color
For selecting whether to display the image on the
viewfinder screen in color or black-and-white.
Select “On” to display in color, and “Off” to display
in black-and-white.
[Setting Values: ROn, Off]
Memo :
0
The setting of this item is valid only in Camera
mode.
0
When this item is set to “Off”, only the captured
images are displayed in black-and-white. The
display and menu screens are displayed in
color.
101
Menu Display and Detailed Settings