INSTRUCTIONS

AE Speed
For setting
the convergence speed during AE (Auto
Exposure).
[Setting Values: RFast, Middle, Slow]
AGC Limit
For setting the maximum gain value of “AGC”,
which electrically boosts the sensitivity level
according to the brightness automatically.
[Setting Values: 24dB, 18dB,
R15dB, 12dB, 6dB]
Auto Iris Limit (OPEN)
For setting the limit value of the OPEN end when
auto iris is enabled.
[Setting Values: F4, F2.8, RF2, F1.8, F1.6, F1.4,
F1.2]
Auto Iris Limit (CLOSE)
For setting the limit value of the CLOSE end when
auto iris is enabled.
[Setting Values: F11, F8, RF5.6, F4]
EEI Limit
For setting the shutter speed control range when
the Automatic Shutter mode (EEI) is enabled.
[Setting Values: 4F-stop, R3F-stop, 2F-stop]
Smooth Trans
For setting the shock reduction function, which
slows down the sudden change when switching
with the [GAIN] or [WHT.BAL B/A/PRST
] switch.
[Setting Values: Fast, Middle, Slow, ROff]
Memo :
0
This function
is disabled when AGC is operating.
FAW
For setting
the position in the white balance switch
[WHT.BAL B/A/PRST] to assign the FAW (Full
Auto White Balance) function.
[Setting Values: B, A, PRST, RNone]
GAIN L, GAIN M, GAIN H
For setting the gain value of each position on the
[GAIN] selection switch.
The setting is fixed at “AGC” in the Full Auto mode.
In addition, the sensitivity setting in Lolux is used.
(A P100 [ Lolux ] )
[Setting Values: AGC, 24dB, 21dB, 18dB, 15dB,
12dB, 9dB, 6dB, 3dB, 0dB]
(Default values GAIN L: 0dB, GAIN M: 6dB, GAIN
H: 12dB)
Dynamic Zoom
For setting whether to enable the dynamic zoom
function.
0
Off:
Enables only the optical zoom (1x to 12x).
0
On:
Enables the dynamic zoom (12x to 24x) in
addition to the optical zoom.
[Setting Values: ROff, On]
Memo :
0
When [System] is
set to “4K”, this item is fixed at
“Off” and cannot be selected.
Handle Zoom Speed L/Handle Zoom Speed
M/Handle Zoom Speed H O
For setting
the zoom speed for each position on the
[ZOOM L/M/H] zoom speed selection switch.
The larger the value the faster the zoom speed.
Selecting “Off” disables the zoom operation on the
handle.
[Setting Values: Off, 1 to 7]
(Default Values Handle Zoom Speed L: 1, Handle
Zoom Speed M: 4, Handle Zoom Speed H: 7)
Zoom Ring
For assigning the zoom or iris adjustment to the
zoom ring.
[Setting Values: RZoom, Iris]
Iris Dial
For assigning the iris, shutter or AE level
adjustment to the iris dial.
If “Iris/Shutter/AE Level
” is selected, the iris dial that
is normally used to adjust the iris will be used to
adjust the shutter speed and the AE level when the
[SHUTTER] button and [AE LEVEL] button are
pressed respectively. After which, the iris dial
resumes its iris operation.
[Setting Values: Iris/Shutter/AE Level, AE Level,
Shutter, RIris]
Camera Function Menu
99
Menu Display and Detailed Settings