INSTRUCTIONS

Password Lock
The Overlay Settings menu can be locked with a
password.
0
On:
A password is required to open the Overlay
Settings menu.
0
Off:
Opens the Overlay Settings menu without a
password.
[Setting Values: On, ROff]
Caution :
0
Do not
forget the password that you have set. If
the password is lost or forgotten, you cannot
deactivate the password protection function.
Camera Function Menu
Menu screen for specifying operation settings
during shooting.
This item can only be selected in the Camera
mode.
Bars
For setting whether to output color bars.
[Setting Values: On, ROff]
Memo :
0
The audio test signals (1 kHz) can be output
simultaneously with the color bar output.
(A P115 [ Test Tone ] )
OIS
For setting whether to enable image stabilizer.
When “On
” is selected, set the Level.
[Setting Values:
ROn, Off]
9
Level
For setting the level of the image stabilizer.
[Setting Values: High, RNormal]
Memo :
0
The icon changes according to the level set.
(A P133 [Image Stabilizer Mark] )
0
When “High” is selected, correcting severe
camera shake may cause the area surrounding
the image to darken.
Flicker Correction
For setting whether to adjust image flicker that
occurs under a fluorescent light.
[Setting Values: On, ROff]
Shutter
For specifying shutter-related settings.
Set to “Step” (fixed value) or
“Variable” when
operating with the J / K volume buttons on the side
of the camera recorder.
0
Variable:
Sets to variable scan. Use this setting when
shooting a PC monitor.
0
Step:
Sets to step shutter, which switches the shutter
speed by a fixed value.
[Setting Values: Variable, RStep]
98
Overlay Settings Menu n
Menu Display and Detailed Settings