INSTRUCTIONS

Protecting Overlay Settings with a
Password
You can use a password to protect overlay settings
to prevent
the cancellation of watermark display by
a third party.
Protecting with a Password
1
Set [Main Menu] B [Overlay Settings
]
B
[Password Lock] to “On”.
2
Enter the protection password and press I
on the cross-shaped button.
Enter not more than 16 characters for the
password using the software keyboard.
3
Enter the same password again and press
I on the cross-shaped button.
4
Press [Set].
A password request screen will appear
subsequently before you enter the [
Overlay
Settings] screen.
Caution :
0
Do not
forget the password that you have set. If
the password is lost or forgotten, you cannot
deactivate the password protection function.
Memo :
0
When overlay settings are protected by a
password, the
following items in [Main Menu] B
[System] are grayed out and cannot be selected.
0
[Reset All]
0
[Record Set
]
B [Record Format]
0
[Setup File
] B [Load File] B [Picture File]/
[User File]/[All File]
0
[Setup File] B [Store File] B [Picture File]/
[User File]/
[All File
]
Deactivating Password Protection
1
Select [Main Menu] B [
Overlay Settings]
.
A password request screen appears.
2
Enter the password and press I on the
cross-shaped button.
If the password matches the configured
password, the [Overlay Settings] menu
appears.
3
Change [Password Lock] to “Off”.
4
Press [Set] to close the deactivation
complete screen.
Specifying Text and Images
1
Connect the camera recorder to a network
compatible device
such as a mobile device
via the network.
(A P150 [Preparing Network Connection n] )
When network connection is established
between the devices, start the Web browser on
the network compatible device.
2
Enter the following URL in the address bar
of the Web browser.
.
http://
“IP address of camera ecorder”
Example; http://192.168.0.1
You can check the “IP address of camera
recorder” by pressing the [STATUS] button on
the camera recorder to display the Status
screen and use the cross-shaped button (H I)
to display the Network screen.
3
Enter the user name (jvc) and the password
(initial password:
0000) on the login screen
to display the Web screen.
4
Press the overlay control icon on the top
left of the screen or the [Overlay Control]
button to display the Settings screen.
.
4
5
Press the [Update] button to reflect the
specified text and images in the overlay.
184
Broadcast Overlay n
Connecting to the Network
n