INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Configuring Settings via a Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Broadcast Overlay
- Others
NTP Set
The time
of the videos recorded simultaneously on
multiple cameras can be synchronized by
reflecting the time information retrieved from the
NTP server in the time code.
The synchronization status with the NTP server
can be checked in the Status screen (network).
Memo :
0
If the network connection is incomplete, a
different result may occur.
0
An error of about several frames may occur in
the time code information that reflects the NTP
time.
0
It may
take a while to update the synchronization
with the NTP server. To update immediately,
turn off the power first, then turn it on again.
9
TC
When “On” is selected, the NTP time will be
reflected in the time code of the camera recorder.
[Setting Values: On, ROff]
Memo :
0
[TC/UB] B [TC Generator] is fixed at “Free
Run(NTP)
”.
0
[TC/UB] B [TC Preset
] is fixed at
“<NTP>”.
0
By synchronizing
the NTP server, NTP time can
be reflected in Date/Time.
(A P116 [ Date/Time ] )
9
Server Address
For setting the address of the NTP server.
If
this
is not configured, “Master Mode” appears on
the Status screen (network).
Zero Config
For allowing this camera recorder to be detected
automatically by external devices (such as
switchers) connected to the same LAN.
Connection can be established via one link from
the menu of the external device.
Memo :
0
When a cellular adapter is used,
[Announcement] is fixed at
“---” and the Zero
Config function is disabled.
The Zero Config function is not equipped with
the function to change the settings of the camera
recorder.
9
Announcement
When “On” is selected, this camera recorder can
be
detected
automatically from an external device.
[Setting Values: ROn, Off]
9
Hostname Prefix
Part of the host name can be changed.
It will appear in the format of
“XXXX-YYYY.local
”
on the Status screen (network).
XXXX : Character string (maximum 8 characters)
configured in [Hostname Prefix]
YYYY : Serial number of this camera recorder
Memo :
0
When [Announcement] is set to
“Off”, this item
does not appear on the Status screen (network).
Reset Network
Restores all items in the [Network] menu to their
default settings.
System Menu
127
Menu Display and Detailed Settings