INSTRUCTIONS

W
Time Code (I)/User’s Bit (J) Display
0
Displays the time code (hour: minute:
second: frame) or user’s bit data.
0
Example of time code display:
.
00:00:00:00
*
* Colon (:) denotes non-drop frames and dot
(.) denotes drop frames.
0
Example of user’s bit display:
.
FF EE DD 20
Memo :
0
You can specify whether to display the time
code, user’s bit, or turn off the display in
[LCD/VF] B [Display Settings]
B [TC/UB].
This item will not be displayed when “Off” is
selected.
(A P115 [ TC/UB ] )
X
Time Code Lock Indicator
When the built-in time code generator is
synchronized with the external time code data
input, Z lights up.
Y
Live streaming mark n
When [System] B [Network]/[
Settings
]
B [Live
Streaming Set] B [Live Streaming] is set to
“On”, the distribution status is displayed.
(A P128 [ Live Streaming ] )
Icon Status
.
(Red)
Distribution in progress (good
connection quality)
.
(Red)
Distribution in progress (poor
connection quality)
.
(Yellow)
Connection pending or
connection failed
Z
Event/Warning Display Area
Displays error messages.
(A P198 [Error Messages and Actions] )
a
Media Status
---- :
No card found in the selected
slot
STBY
: Recording standby
RREC
: Recording
REVIEW : Clip Review
(A P77 [Viewing Recorded Videos Immediately
(Clip Review)] )
STBY P
: Pre Rec recording standby
(A P82 [Pre Rec] )
RRECP
: Pre Rec recording
(A P82 [Pre Rec] )
STBY C
: Clip Continuous Rec recording
standby
(A P83 [Clip Continuous Rec] )
RRECC
: Clip Continuous Rec recording
(A P83 [Clip Continuous Rec] )
STBYC
(displayed in
yellow)
: Clip Continuous Rec recording
pause
(A P83 [Clip Continuous Rec] )
STBY N
: Interval Rec recording standby
(A P86 [Interval Rec] )
STBYN
(displayed in
red)
: Interval recording pause
RRECN
: Interval Rec recording
(A P86 [Interval Rec] )
STBY M
: Frame Rec recording standby
(A P85 [Frame Rec] )
RRECM
: Frame Rec recording
(A P85 [Frame Rec] )
STBYM
(displayed in
yellow)
: Frame Rec recording pause
(A P85 [Frame Rec] )
STOP : Unable to record to the card in
the slot
P.OFF : Power OFF
b
Dual Rec/Backup Rec Display
“DUAL” is displayed in the Dual Rec mode and
“BACKUP” is displayed in the Backup Rec
mode.
(A P126 [ Slot Mode ] )
Memo :
0
This item is not displayed when [Slot Mode] is
set to
“Series”.
0
This item is not displayed when [LCD/VF] B
[Display Settings] B [Media Remain] is set to
“Off”. However, warnings will be displayed.
(A P
115 [ Media Remain ] )
0
Displayed in the
Display 0 and Display 1 screens
during warnings only. (When the remaining time
is shorter than 3 minutes)
Display Screen in Camera Mode
143
Display/Status Screen