INSTRUCTIONS(Basic)

Basic Shooting
Procedures
Preparations
.
1
3
4
4
2
1
Supply battery or AC adapter power to the
camera recorder.
2
Insert an SD card.
3
Turn on the power of the camera recorder.
Hold down the lock button (blue) at the center of
the [POWER ON/OFF] switch to set to “ON”. The
camera recorder starts up in Camera mode and
is ready for recording.
4
Adjust the angle of the LCD monitor and
viewfinder.
5
Set [System], [Format], [Resolution],
[Frame Rate] and [
Bit Rate] in [Main Menu]
B [System] B [Record Set] B [Record
Format].
0
You can
select the resolution of the recorded
videos (4K, HD, SD, or Web), file format for
recording/playback, and the video recording
format on this camera recorder.
0
Press the [MENU/THUMB] button on the
LCD monitor to display the menu screen on
the LCD monitor and viewfinder.
0
The following setting values are the factory
defaults.
[System]: HD
[Format]: QuickTime
[Resolution]: 1920x1080
[Frame Rate]: 60i (U model) or 50i (E model)
[Bit Rate]: 35M(UHQ)
Shooting
.
1
Press the [REC]
button to start recording to
the SD card.
This camera recorder has two [REC] buttons.
Any of the [REC] buttons can be used to start/
stop recording by default.
The tally lamp lights up in red during recording.
0
Zoom Operation
0
Adjusting the Focus
Memo :
0
If both
the slots are loaded with recordable cards
in the factory default, pressing the [REC] button
starts recording only to the media in the selected
slot.
When [System] B [Record Set] B [Slot Mode] is
set to “Dual”, recording can be performed
simultaneously to the cards in both the slots.
0
The tally lamp can be turned off in [System]
B
[Tally Lamp].
22
Basic Shooting Procedures
Shooting