User Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Configuring Settings via a Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
3
Set the time interval to start recording in
[Interval Rec].
Set using [Main Menu] B [System
] B [Record
Set] B [Rec Mode] B [Rec Interval].
(A P116 [ Rec Interval ] )
4
Start recording.
0
Press the
[REC] button to record only the
number of frames specified in [Rec Frames]
and pause.
0
After the specified time in [Rec Interval] has
passed,
recording starts again to record only
the number of frames specified in [Rec
Frames] and pause.
0
Interval Rec continues until the recording is
stopped.
The display changes (“STBYN” B “RRECN”
B “STBYN” (red text) B “RRECN” B
“STBYN” (red text)).
0
The
card slot status indicator blinks in green.
5
Press and hold the [REC] button.
0
The card slot status indicator lights up in
green.
0
The display becomes “STBYN”.
Caution :
0
Do not remove the SD card during recording
(RRECN,
red text) or recording pause (STBYN,
yellow text).
0
To remove the SD card during Interval Rec,
press the [CANCEL] button, check that “STBYN”
(white text) is displayed and the card slot status
indicator lights up in green before you remove
the card.
0
When [Main Menu] B [TC/UB] B [TC
Generator] is set to “
Free Run”, the time code
will be recorded in “Rec Run”.
0
Audio cannot be recorded. The audio level
meter is grayed out.
(A
P128 [Audio Level Meter] )
Splitting the Clips Freely
(Clip Cutter Trig)
You
can split the clips freely without having to stop
recording during shooting.
1
Assign the “Clip Cutter Trig” function to
any of the user buttons.
(A P
39 [Assignment of Functions to User
Buttons] )
2
Press the user button that is assigned with
“Clip Cutter Trig
” during shooting.
A clip cut icon (Q) appears on the display
screen for 3 seconds, and the clip is split.
.
1/100
F1. 6
18
dB
AE+6
ND 1/16
12 : 34 : 56
Jan 24 , 2015
00:00:00.00
4030 20 10 0
5 . 6 f t
P 15 00 0K
Memo :
0
Clips cannot be split again for a few seconds
after the operation is performed.
0
This item cannot be used when
[Slot Mode] is
set to “Backup”.
0
Available when
[System] is set to “4K”, “HD” or
“SD”.
(A P115
[ System ] )
0
This item cannot be used when [Rec Mode] is
set to a value other than “Normal” or “Pre Rec”.
(A P
116 [ Rec Mode ] )
0
The split clips are recorded seamlessly without
interruptions in the video.
82
Special Recording
Shooting