User manual

0
Set
the zoom speed for “L”, “M” and “H” of the
[ZOOM L/M/H] zoom speed switch
individually.
Increasing the value increases the zoom
speed.
(A P97 [Handle Zoom Speed L/Handle Zoom
Speed M/Handle Zoom Speed H O] )
Memo :
0
The zoom lever on the handle is disabled when
“Off
” is selected.
2
Set the [ZOOM L/M/H] zoom speed switch
to any of the settings.
3
Press the zoom lever at the handle to zoom.
0
The zoom operation is performed in the
speed that has been set.
Using Zoom Ring at the Lens Section
You can adjust the preferred angle of view by
turning the zoom ring.
Saving/Recalling Current Zoom
Position (Preset Zoom)
This allows you to register up to three zoom
positions.
1
Assign the “Preset Zoom1”, “Preset
Zoom2”,
or “Preset Zoom3” function to any
of the user buttons.
(A P
39 [Assignment of Functions to User
Buttons] )
(A P98 [USER1 ~ USER9, LCD KEY▲/LCD
KEY▶/LCD KEY▼/LCD KEY◀] )
2
Save the current zoom position.
0
Press any of the user buttons assigned with
the “Preset Zoom1
”, “Preset Zoom2”, or
“Preset Zoom3” function for more than 1
second.
0
The current zoom position will be stored.
3
Recall the stored zoom position.
0
Press any of the user buttons assigned with
the “Preset Zoom1
”, “Preset Zoom2”, or
“Preset Zoom3” function and release within 1
second.
0
The camera recorder zooms to the stored
zoom position.
Memo :
0
The zoom speed to the zoom position can be set
in [Main Menu] B [Camera Function] B [User
Switch Set] B [Preset Zoom Speed].
(A P
99 [ Preset Zoom Speed ] )
0
Operating other zoom maneuvers during a
zoom position recall will cancel the recall.
Focus Operation
.
Adjusting Focus Automatically
1
Press the [
AF/MF] selection button to set to
Auto Focus mode.
There is no icon display in Auto Focus mode.
Memo :
0
If
[Main Menu] B [Camera Function] B [AF
Assist] is set to “Area” or “Far/Near”, you can turn
the focus ring to shift the auto focus point while
in the automatic focus adjustment mode.
(A P
97 [ AF Assist ] )
0
When face detection is enabled, the Auto Focus
icon e appears with the face mark.
(A P53 [Adjusting the Focusing by Face
Detection] )
(A P98 [ Face Detect ] )
One Push Auto Focus
If [Push
AF/AF Lock] is assigned to the user button,
pressing the assigned user button (within 1 minute)
while in the Manual Focus mode makes the camera
recorder focus on the center of the frame
automatically.
Memo :
0
Face detection does not work during One Push
Auto Focus.
0
AF Assist does not function.
0
When the operation is complete, the camera
recorder returns to the Manual Focus mode
automatically.
0
One Push Auto Focus functions with emphasis
on the focusing speed. This function is not
suitable during recording.
50
Zoom Operation
Shooting