User manual

Memo :
0
The battery mark that appears before the “Time”,
“Capacity%” or “Voltage” value changes
according to the remaining battery power.
In addition, the plug mark is added during
charging.
4 S : 10 % and below
D R : 11 % to 30 %
C Q : 31% to 70 %
B P : 71 % to 100 %
0
When
the remaining battery power is low, “RES”
instead of the value is displayed.
Replace the battery as soon as possible.
0
The remaining battery power and remaining
time are intended as reference values for the
shooting duration.
0
The time, capacity or voltage will not be
displayed during charging.
Date/Time
For
specifying whether to display the date and time
in the display on the LCD monitor and viewfinder
screen.
[Setting Values: ROn, Off]
Date Style
For setting the date display sequence for display
on the LCD monitor and viewfinder screen as well
as for time stamp recording.
Display examples of the setting values are as
follows.
0
DMY2: 30 Jun 2012
0
DMY1: 30-06-2012
0
MDY2: Jun 30, 2012
0
MDY1: 06-30-2012
0
YMD: 2012-06-30
[Setting Values: DMY2, DMY1, MDY1, MDY2,
YMD]
(Default values: MDY2 (U model), DMY1 (E
model))
Time Style
For setting the time display for display on the LCD
monitor and viewfinder screen as well as for time
stamp recording.
[Setting Values: 24hour, 12hour]
(Default values: 12hour (U model), 24hour (E
model))
Shutter
For setting the shutter display to be displayed on
the LCD monitor and viewfinder screen.
0
DEG:
Displays the shutter speed in degrees in the
same way as film cameras.
0
SEC:
Displays the shutter speed in seconds.
[Setting Values: DEG, RSEC]
Memo :
0
“DEG” is selectable only when [WFrame Rate]
is set to
“24p” or “25p”.
When [WFrame Rate] is set to other values, the
shutter display setting is fixed at “SEC” and
cannot be selected.
(A P
115 [ W Frame Rate ] )
108
LCD/VF Menu
Menu Display and Detailed Settings