User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Configuring Settings via a Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
9
Preset
For setting the user’s bit. (Digit by digit)
Display
: AB CD EF 01
(A P71 [Presetting the User’s Bit] )
Memo :
0
When [UB Mode] is set to
“Date” or “Time”, this
item appears as “---” and preset is disabled.
Drop Frame
For setting the framing mode of the time code
generator.
0
Non Drop:
Internal time code generator works in the non-
drop-frame
mode. Use this setting when placing
emphasis on the number of frames.
0
Drop:
Internal time code generator works in the drop-
frame mode. Use this setting when placing
emphasis on the recording time.
[Setting Values: Non Drop, RDrop]
Memo :
0
This item can be set only when
[Main Menu] B
[System] B [Record Set] B [Record Format] B
[WFrame Rate] is set to “60p”, “30p”, or “60i”.
When [Frame Rate] is “24p”, “Non Drop”
becomes fixed and cannot be selected. When
[Frame Rate] is “50p”, “25p”, or “50i”, this item
appears as “---” and cannot be selected.
(A P
115 [ W Frame Rate ] )
LCD/VF Menu
Item for specifying settings related to the LCD
monitor or viewfinder screen.
This menu screen can be used to specify settings
related to the Focus Assist mode, zebra pattern
display, screen size, marker, and safety zone. In
addition, it is also used for selecting whether to
display characters on the LCD monitor or
viewfinder screen, as well as for adjusting the
picture quality of the LCD monitor.
Shooting Assist...
Menu for setting the Shooting Assist function.
(A P105
[Shooting Assist Item] )
Marker Settings...
For setting items such as the safety zone and
center mark.
(A P106
[Marker Settings Item] )
Display Settings...
For specifying display-related settings.
(A P107
[Display Settings Item] )
VF SW
For setting whether to assign the operation for
pulling out or retracting the viewfinder to the switch.
0
Disable:
A viewfinder image is displayed regardless of
the state of the viewfinder.
0
Enable:
Displays a viewfinder image only when the
viewfinder is pulled out.
[Setting Values: Disable, REnable]
Memo :
0
Displays a viewfinder image regardless of the
setting when an image is not displayed on the
LCD monitor.
(A P37
[Displays on the LCD Monitor and
Viewfinder Screen (VF)] )
VF Color
For selecting whether to display the image on the
viewfinder screen in color or black-and-white.
Select “On” to display in color, and
“Off” to display
in black-and-white.
[Setting Values: ROn, Off]
104
TC/UB Menu
Menu Display and Detailed Settings