User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Attaching the Wireless LAN Antennas
(Supplied) u v
Attach the wireless LAN antenna by turning it in the
clockwise direction. Hold the base while attaching
the antenna.
.
Caution :
0
Applying force to the wireless LAN antenna or
yanking it may damage the antenna so please
use caution when using the antenna.
If it
is damaged, replacement is chargeable even
during the warranty period.
(Part number: T9A-0095-00)
0
Use the antenna holders without removing
them.
Attaching the Tripod (Sold Separately)
Mount this camera recorder after attaching the
KA-551U tripod base unit (sold separately) to the
tripod.
To prevent the camera recorder from falling off,
which may result in injuries or damages, read the
“INSTRUCTIONS” of KA-551U as well as that of
the tripod
to be used to attach the camera recorder
securely.
Caution :
0
If the camera recorder exceeds the weight limit
of the tripod, do not mount it on the tripod.
0
Use the tripod on a stable surface.
Adjusting the Position of the Shoulder
Pad
Adjust the position of the shoulder pad back and
forth.
1
Release the lock of the lock lever and adjust
the position of the shoulder pad back and
forth.
2
Lock the lock lever and check that the
shoulder pad is fixed.
.
Lock Lever
32
Settings and Adjustments Before Use
Preparations