User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Functions of Network
Connection
The network feature comprises web-browser-
based functions using devices such as a
smartphone, tablet
terminal, or PC, as well as FTP
and live streaming functions that run via thumbnail
screens and menu operation.
Memo :
0
When [System
] B [Record Set] B [Record
Format] B [System] is set to “High-
Speed”2, only “Planning Metadata” can be
used for the [LAN] terminal connection.
Connecting to the Network
0
[LAN] Terminal
0
Built-in Wireless LAN u v
0
Connect the following adapters to the [
HOST]
terminal (USB)
0
Wireless LAN adapter
0
Ethernet adapter
0
Cellular adapter
(A P186 [Camera Setup for Network
Connection] )
List of Functions
Importing Metadata
You can download a metadata settings file (XML
format)
from
the FTP server and store metadata in
the camera recorder.
(A P189 [Importing Metadata] )
Uploading Recorded Clips
You can upload clips recorded in the SD card to a
preset FTP server.
(A P191
[Uploading a Recorded Video Clip] )
Memo :
0
Uploading can also be performed via a web
browser.
(A P199 [Uploading a Recording Clip via a Web
Browser] )
Editing Metadata
0
Planning Metadata
You can
access the page for editing the camera
recorder’s metadata via a web browser on
devices such as a smartphone, tablet terminal,
or PC, and edit the metadata that is to be applied
to clips to be recorded.
(A P195 [ Planning Metadata ] )
0
Clip Metadata
You can access the page for editing the
metadata via a web browser on devices such as
a smartphone, tablet terminal, or PC, and
display or rewrite the metadata that is recorded
to a clip.
(A P196 [ Clip Metadata ] )
View Remote
You can access via a web browser on devices such
as a smartphone, tablet terminal, or PC to check
the live image or remotely control the camera.
(A P202 [View Remote Control and Camera
Control Functions] )
Camera Control
You
can access via a web browser on devices such
as a
smartphone, tablet terminal, or PC to remotely
control the camera.
(A P202 [View Remote Control and Camera
Control Functions] )
Live streaming
By combining with the decoder or PC application
that supports
live streaming, you can perform audio
and video streaming via the network.
(A P210 [Performing Live Streaming] )
Functions of Network Connection
185
Connecting to the Network