INSTRUCTIONS(BASIC)

Using a Battery Pack
Recommended Batteries
U model : Dionic HC, Digital 150 (Anton/Bauer)
E model :
E-HL9, DUO-150 (IDX)
* Models with an E suffix are for the European
market and the UL Listing mark is not applicable.
Caution :
0
Make use
of the recommended batteries. Heavy
batteries may fall off if not used correctly.
0
For details on how to charge the battery, please
refer to the [instruction manual] of the battery in
use.
Battery Operating Time
The following are the approximate times for
continuous operation on fully-charged batteries.
Battery
Continuous
Recording Time (At
25 °C)
Dionic HC (U model) Approx. 2.3 hrs
Digital 150 (U model) Approx. 4.0 hrs
E-HL9 (E model) Approx. 2.2 hrs
DUO-150 (E model) Approx. 3.7 hrs
Memo :
0
Actual operating
times may differ depending on
the age of the battery, charging condition, and
operating environment.
0
Operating time is shortened in cold
environment.
0
The operating time may shorten when power
zoom is used, accessories are connected, or
when the LCD monitor is frequently used.
Precautions for the Battery Operation
0
Do not remove the battery when the [POWER
ON/OFF] switch is “ON”.
0
Do not insert or remove the DC cable when the
battery is in use.
0
Leaving the camera recorder unused with the
battery attached will deplete the battery power
even when you set the
[POWER ON/OFF
]
switch to “OFF”. Remove the battery if you are
not using the camera recorder.
Attaching/Detaching the Battery (U Model)
Use the Dionic HC or Digital 150 (Anton/Bauer)
battery.
1
Align the battery guide pins (x3) with the
battery adapter
guide hole, and insert them
directly.
.
Guide Pins
Guide Hole (x3)
2
Slide the battery in the direction indicated
by the arrow until a “click” sound is heard.
Memo :
0
If the guide pins are not inserted straight, the
battery will not be attached correctly.
3
Detaching the Battery
Press down the release lever and slide the
battery
toward
you to detach it from the camera
recorder.
.
Release Lever
Battery
18
Power Supply
Preparations