User manual

3
Start normal recording (normal recording
into slot A).
0
Press any of the
[REC] buttons.
0
Recording into the media in slot A starts.
(The characters “
RREC” appear in red.)
0
The card
icon of slot A turns red (unselected
state), and the status indicator of slot A blinks
in red.
.
100min
50min
282min
1
/60
F2.8
AE
±0
ND1
/64
12 :34 :56
ISO
102400
00: 00:00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6 f t
B 5600
K
50min
100min
Red (not selected)
4
Stop normal recording.
0
Press any of the [REC]
buttons again.
0
Recording to slot A stops, and the card slot
mark of slot A turns white (unselected state).
0
The characters “RREC” (red) changes back
to “STBY” (white).
0
The status indicator of slot A goes out.
.
100min
50min
282min
1
/60
F2.8
AE
±0
ND1
/64
12 :34 :56
ISO
102400
00: 00:00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6 f t
B 5600
K
50min
100min
White (not selected)
5
Stop backup recording.
0
Select [STBY] in [System] B [Record Set] B
[
Slot Mode
] B [Backup Rec] and press the
Set button (R).
(A P164
[ Slot Mode ] )
0
You can also press the user button that is
assigned with “Backup Trig”.
(A P113 [User Switch Set Item] )
0
Recording to Slot B or the expansion slot
stops, and
the card slot mark of Slot B or the
expansion slot turns white (selected state).
0
The status indicator of slot B lights up in
green.
.
100min
50min
282min
1
/60
F2.8
AE
±0
ND1
/64
12 :34 :56
ISO
102400
00: 00:00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6 f t
B 5600
K
50min
100min
White
Memo :
0
When one
of the media has run out of free space
during backup recording, recording will stop
only for the card that is full.
0
When recording to each slot is stopped,
recording in the REGEN mode will be enabled
for the card slot in which recording started.
0
When recording is started in the other slot while
recording to one slot, the clip being recorded is
split and simultaneous recording to the other
card starts.
0
When either normal recording or backup
recording is stopped while both are in progress,
the clip in the slot where recording is still ongoing
will be split.
0
Although the clips are separated during
recording the clips can be seamlessly joined by
arranging them on the timeline of the editing
software since they are recorded seamlessly.
0
Clip Cutter Trig cannot be performed during
backup recording.
(A P96 [Splitting the Clips Freely (Clip Cutter
Trig)] )
0
When [Slot Mode] is set to “Backup
Y” or
“Backup
”, [Rec Mode] can only be set to
“Normal”.
(A P163 [ Rec Mode ] )
Backup Rec
91
Shooting