User manual

Memo :
0
The [Threshold Level
], [Attack Time], [Decay
Time], [Mode], etc. of the compressor can be
configured in [A/V Set] B [Audio Set] B [CH1/2
DRC]/[CH3/4 DRC] for the audio to be recorded.
* DRC (Dynamic Range Compressor)
0
The limiter operates according to the setting in
[A/V Set] B [Audio Set] B [Limitter
] B [CH1](/
2/3/4).
When [Limitter] is set to “Off”, the limiter function
is disabled even when the [MANUAL/AUTO]
switch is set to “AUTO”. This may cause the
OVER indication of the level meter to light up.
0
The reference audio level is configured in [A/V
Set
] B [Audio Set] B [CH1/2 Audio Ref. Lv.]
(common for CH1/2)/[CH3/4 Audio Ref. Lv.]
(common for CH3/4).
Automatic Adjustment Mode
0
Set the [AUDIO SELECT CH1/2/3/4]-[MANUAL/
AUTO] selection switch to “AUTO” or press the
user button assigned with “Full Auto” to set Full
Auto mode to off. This activates the Automatic
Adjustment mode and the audio recording level
is configured automatically according to the
input level.
0
The audio setting in Full Auto mode can be
configured in [Camera Function] B [Full Auto] B
[Audio Set].
Memo :
0
If [A/V Set]
B [Audio Set] B [CH1/2 DRC]/
[CH3/4 DRC] B [Threshold Level] is set to a
value other than “Off”, the compressor operates
according to the value set.
Audio Recording
73
Shooting