User manual

“UniSlot”
Wireless
Receiver
Camera
Single: CH1
B
CH1/CH2
Dual: CH1
B
CH1
CH2
B
CH2
Caution :
0
Power is supplied to the “UniSlot” wireless
receiver when any of the CH1/CH2/CH3/CH4
switches is set to “WIRELESS”.
Adjusting the Audio Recording Level
You can select to adjust the audio recording levels
for
each
of the four channels (CH1/CH2/CH3/CH4)
manually or automatically.
.
P
R
AUDIO INPUT
DI
S
Manual Adjustment Mode (Manual
Adjustment)
0
The manual adjustment mode is enabled by
setting the [AUDIO SELECT CH1/2/3/4]-
[
MANUAL/AUTO] selection switch on this
camera
recorder to “MANUAL”. The audio level
for each channel can be configured in [A/V Set]
B [Audio Set] B [CH1 Audio Level](/2/3/4) B
[Front]/[Rear/Wireless].
0
You can adjust the level manually during the
recording, recording standby, and stop modes.
Memo :
0
The audio setting in Full Auto mode can be
configured in
[Camera Function] B [Full Auto] B
[Audio Set].
1
Set the [AUDIO SELECT CH1/2/3/4]-
[MANUAL/AUTO]
selection switch to
“MANUAL” for the channel to be adjusted
manually.
2
Turn the adjustment knob corresponding
to the channel to adjust the level.
When [A/V Set] B [
Audio Set
] B [CH1/2 DRC]/
[CH3/4 DRC] B [Threshold Level] is set to “Off”,
adjust such that the audio level meter -2 dB
does not light up even for loud sounds.
(A P140 [ Threshold Level ] )
.
100min
50min
282min
1
/60
F2. 8
AE
±0
ND1
/64
12 :34 :56
ISO
102400
00: 00: 00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6 f t
B 5600
K
-2dB
72
Audio Recording
Shooting