User manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter (Sold Separately)
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
Automatic Gain Mode (Automatic Gain
Adjustment)
1
Set Full Auto mode to off using the user
button assigned with “
Full Auto”.
2
Set [Camera Function] B [GAIN L]/[
GAIN
M]
/[GAIN H] to “AGC”.
(A P112 [GAIN L, GAIN M, GAIN H] )
If
an item specified with “AGC” is selected using
the [GAIN L/M/H] gain switch, the Auto Gain
Adjustment mode is enabled and the gain of the
video amplifier is automatically set according to
the brightness of the subject.
Memo :
0
Use the
user button assigned with “Full Auto” to
enter the Full Auto mode also activates the Auto
Gain mode. In this case, the Iris, Shutter and
White Balance also enter into Auto mode
forcibly.
0
The gain operation during Full Auto mode can
be configured in [Camera Function] B [Full
Auto] B [Gain].
0
The upper limit of the gain setting value during
AGC
operation
can be set in [Camera Function]
B [AGC Limit].
(A P112 [ AGC Limit ] )
0
While in the Auto Gain mode, and [AE Lock] is
set to “AE” or “AE/FAW
”, a
icon appears on
the left side of the gain value during lock
operation.
Setting the Electronic
Shutter
You can change the shutter speed (time for each
shooting frame) using the electronic shutter
function. Electronic shutter can be adjusted
manually or automatically.
Manual Shutter Mode (Manual Shutter
Switching)
1
Set Full Auto mode to off using the user
button assigned with “Full Auto
”.
2
Set [Camera Function] B [Shutter
]
to
“Slow” or “Step/Variable”.
0
The shutter speed appears on the screen.
.
100min
50min
282min
1
/60
F2.8
AE
±0
ND1
/64
12 :34 :56
ISO
102400
00: 00:00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6 f t
B 5600
K
Memo :
0
To display
Shutter in angle (DEG), set [WFrame
Rate] to “25p” and set [LCD/VF] B [Display
Type] B [Shutter] to “DEG”.
(A P161 [WFrame Rate/
Frame Rate] )
(A P111 [ Shutter ] )
Switching Shutter Speed
o
Manual shutter mode (step/variable)
Press down the [SHUTTER] switch toward the
“SEL” end.
When the shutter speed indication turns
white, press down the [SHUTTER] switch
repeatedly to change the setting.
Example:
.
1/60 1/100 1/2000
1/60.00
1/1000
Variable
Step
Setting the Gain
63
Shooting