User manual

Memo :
0
Using the user button assigned with “Full Auto”
to enter the Full Auto mode also activates the
automatic brightness adjustment (AE) mode. In
this case, the White Balance also enters into
Auto mode forcibly.
0
The convergence speed of the automatic
adjustment for
automatic brightness adjustment
(AE) can be set in the menu.
(A P111 [ AE Speed ] )
0
If one or more of the items (Gain, Iris and
Shutter) have been set to Auto mode, the value
of the
corresponding items when the user button
that is assigned “AE Lock” is pressed can be
fixed.
(A P115 [ AE Lock ] )
0
If one or more of the items (Gain, Iris and
Shutter) have been set to Auto mode, the
automatic brightness adjustment (AE) mode is
enabled.
Adjusting the Brightness Manually
Use the user button assigned with “Full Auto”
to set
Full Auto mode to off, some or all of the items (Iris,
Gain and Shutter Speed) can be manually
adjusted.
1
Set Full Auto mode to off using the user
button assigned with “
Full Auto”.
2
Adjust the Iris, Gain and Shutter speed.
0
[Adjusting the Iris] (A P
61)
0
[Setting the Gain] (
A P 62)
0
[Setting the Electronic Shutter] (A
P 63)
Memo :
0
The brightness cannot be manually adjusted in
the Full Auto mode.
0
If Iris, Gain and Shutter Speed are manually
adjusted, the [AE Level
] setting is temporarily
disabled.
Adjusting the Iris
Adjust the
aperture of the lens iris according to the
brightness of the subject.
Manual Iris (Manual Adjustment) Mode
The aperture value (F-number) of the lens can be
set manually.
1
Set Full Auto mode to off using the user
button assigned with “
Full Auto”.
2
Set to Manual Iris mode using the [IRIS
A/M] switch on the lens.
The lens aperture value (F-number) is
displayed.
.
100min
50min
282min
1
/60
F2.8
AE
±0
ND1
/64
12 :34 :56
ISO
102400
00: 00:00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6 f t
B 5600
K
3
Turn the iris ring on the lens to adjust the
iris manually.
The open F-number of the aperture varies
according to the zoom position.
F-number Description
Decrease The subject appears brighter.
The focused range becomes
sharper, while the background is
blurred to produce a soft image.
Increase The subject appears darker.
Background of image becomes
focused as well.
Memo :
0
Even while in the Manual Iris mode, pressing
and holding the [IRIS] button on the lens
switches the camera recorder to the Push Auto
Iris mode.
Push Auto Iris
When the camera recorder is in the Manual Iris
mode, press and hold the [IRIS] button on the lens
to change to the Auto Iris mode temporarily. The
iris will be automatically adjusted according to the
brightness of the subject.
Adjusting the Brightness
61
Shooting